Download User`s Manual - QED Productions

TETRA VIO
Chapter 4 : FRONT PANEL DISPLAY MENUS DESCRIPTION
4-1. INTRODUCTION
The front panel display menu presents 2 modes: the STATUS MODE and the CONTROL MODE.
• The STATUS MODE indicates the input and output status of the device.
• The CONTROL MODE allows selecting and adjusting the parameters of the device.
4-2. CONTROL BUTTONS
The front panel display is controlled by 2 buttons and 1 knob:
knob:
• In the CONTROL MODE, turn this knob to scroll thru the different menus.
• In the STATUS MODE, turn this knob to adjust the master volume.
EXIT / MENU button:
• In the STATUS MODE, press this button to enter in the CONTROL MODE.
• In the CONTROL MODE, press this button to:
- return to the previous menu without safeguarding the selection.
- return to the STATUS MODE (press several times).
ENTER button:
• From the STATUS MODE, press this button to enter in the CONTROL MODE.
• From the CONTROL MODE, press this button to confirm a selected item.
4-3. STATUS MODE
When switching ON, the front panel display shows the product's name and firmware versions as follows:
DEVICE MODEL
DEVICE VERSION
TVC401
DEVICE STATUS
Version _._
Out: 1024x768
d
intern rate
f
g
60 Hz
c
e
Input: 1
800x600
37.9 K / 60Hz
OUTPUT STATUS
INPUT STATUS
h
c OUTPUT FORMAT.
d OUTPUT RATE MODE.
e OUTPUT FRAME RATE.
f SELECTED INPUT.
g INPUT FORMAT OR INPUT STANDARD.
h INPUT LINE / FRAME FREQUENCY.
PAGE 19