Download XFR600-2 Operating Manual

Operation
Front Panel LEDs
Front Panel LEDs
The status LEDs on the front panel give an instant indication to the status of the
power supply.
LED
Description
REM
Unit is operating under remote control. Remote settings apply.
SRQ
Unit is requesting service
S/D
Unit is in shutdown due to tripped protection mechanism,
command, or interlock
In addition, the XFR and XHR series power supplies have the following additional
indicators.
Release 2.1
LED
Description
ERR
Unit has encountered an error
ADR
Unit is receiving a command
OVP
Unit is shutdown due to a hardware over-voltage condition.
OTP
Unit is shutdown due to an over-temperature condition.
ACF
Unit is shutdown due to an AC input failure condition (AC line may
be high or low.)
POL
Used to indicate the AUX A status condition is true.
FLT
Used to indicate the AUX B status condition is true.
47