Download Ethernet Remote Master Module

Introduction
1--3
Below is a table showing a summary of contents provided within each section of this
manual.
Chapters
Introduction
2
ERM / Slave
Addressing Modes
3
4
Installation and
Network Layouts
provides information on Ethernet module network identifiers
including Module ID, IP Address and Ethernet Address.
explains installation of the ERM module into the PLC base
and discusses network layouts and cabling.
Configuring the ERM
describes installing and using ERM Workbench software
and Remote Slaves with configuration utility to configure the ERM and its remote
ERM Workbench
Ethernet slaves
5
6
Using NetEdit
Maintenance and
Troubleshooting
describes the use of NetEdit to assign an IP Address or
Module ID to the Ethernet modules
provides information to aid you in diagnosing and correcting
communication problems. Includes a troubleshooting chart
for potential communication problems and their solutions.
The ERM modules have three LEDs which will help you
diagnose communication problems.
Appendices
A
B
General Specifications
gives environmental and operating specifications, and
information about compliance with agency standards.
ERM / Slave Diagnostics
provides ERM and slave diagnostic information and error codes.
and Error Codes
C
ERM and ERM
Workbench Default
Settings
D
Mapping ERM Slave I/O
in a Think & Do
WinPLC System
provides factory default settings.
explains using Think & Do Studio to map the ERM slave I/O points
to Data Items..
The “note pad” icon in the left-hand margin indicates the paragraph to its immediate
right will be a special note.
The “exclamation mark” icon in the left-hand margin indicates the paragraph to its
immediate right will be a warning or caution. These are very important because the
information may help you prevent serious personal injury or equipment damage.
Introduction
1
provides an overview of the manual and its contents.
Introduces the Ethernet Remote Master (ERM) Module and
its uses. Includes Frequently Asked Questions concerning
the ERM modules.