Download RAEPoint User Guide

15.1 RAEPoint Host
The LEDs on the RAEPoint Host indicate the following conditions:
Net
 Blinks when a network is established.
 Off when a network is absent.
Alarm
 Glows solid red when detectors are in alarm
 Blinks red when detectors have a fault.
 Blinks red when DC supply voltage is below 11 volts.
Comm  Flashes when there is RF (radio frequency) send/receive
activity.
Mode
 Glows solid green.
Notes
Relay Definitions:
Relay 1
Relay 2
Relay 3
Relay 4
Relay 5
Any alarms
Any low alarms
Any high alarms
High LEL alarms
High H2S alarms
21