Download ML-TRIM User Manual (806KB PDF)

Jog has the least operating priority. Jog ramps to the Jog Setpoint (CP-05), using the
Acceleration Time (CP-16). When Jog is terminated, the ML–Trim brings the Speed
Command output to an immediate Zero. Unlike the other inputs, Jog is not latched and
must be sustained to remain active.
To activate Jog:
• Short the F–Stop and R–Stop inputs to common.
• Open the Run input.
• Short the Jog input to common. (Jog must be sustained to remain active).
RUN
6
RUN
7
JOG
8
COMMON
9
R-STOP
10
F-STOP
11
COMMON
JOG
R-STOP
F-STOP
J5
Maintain Closed
3 - 36