Download Spec - CNC International

Extension of the clamping system
The AGIE Universal Clamping Frame allows the workpiece to be fastened directly to its clamping plates. The hole pattern is compatible for
all current clamping devices from the following manufacturers:
• Mecatool
• EROWA
• 3R
• Hirschmann
The clamping devices must be mounted in accordance with the
manufacturer’s instructions.
Caution:
When using the clamping devices, great attention must be paid to the
risk of collision (ö “Collision-free zones”).
Also take the size of the moving parts (arms, heads, cables, ...) into
consideration during positioning, this being particularly important when
clamping several pieces in the working area.
Collision-free zones
The collision-free zones in the following drawings may be occupied by
the workpiece, clamping devices or anything else without the risk of
collision.
This is the case as long as nothing is clamped on the guide heads or
the arms.
These collision-free zones can be enlarged if the distance between the
flushing nozzles and the workpiece surface is increased.
Agiecut Cla, Cha, Evo, Exc
©AGIE 06.2002
C2.1
34
Technical data, Place of installation, Connections, Transport