Download Programmer`s Manual for ANSYS

Transcript
6.1.1. Creating a New Element via the User-Defined Element API
StrainPl
O
StrainCr
StressBk
StrainSw
EnergyD
O
O
O
O
MatRotGlb
O
1.
Total plastic strain components Output
--[1]
Total creep strain components [1] Output
--Back stress components [1]
Output
--Swelling strain
Not yet supported
--Energy density:
----1 = Elastic energy density
2 = Plastic energy density
3 = Creep energy density
Used only for
Rotation matrix from
Rotation matrix
global Cartesian to ro- solid elements
tated element coordinate when nlgeom =
system
on
All tensor component values in the routine are in the global Cartesian coordinate system for solid elements,
and in the co-rotated element Cartesian coordinate system for link, beam and shell elements.
*deck,ElemGetMat
subroutine ElemGetMat (elId, matId, nDim, nTens, nDirect,
intPnt, xCurIP, TemperIP,
TemperIPB, kTherm, IncStrain,
defG0, defG, CMat, MatProp,
Stress, Strain, StressTh, StrainTh,
StrainPl, StrainCr, StressBk, StrainSw,
EnergyD, MatRotGlb)
&
&
&
&
&
&
c*************************************************************************
c
c *** Primary function: call ANSYS material routines to obtain material
c
data for USER300 elements
c *** Notice - This file contains ANSYS Confidential information ***
c
c
input arguments
c
===============
c
elId
(int,sc)
element number
c
matId
(int,sc)
material number of this element
c
nDim
(int,sc)
number of dimensions of the problem
c
= 2 2D
c
= 3 3D
c
nTens
(int,sc)
number of stress/strain components
c
nDirect
(int,sc)
number of stress/strain direct
c
components
c
intPnt
(int,sc)
current integration point number
c
xCurIP
(dp,ar(3))
coordinates of integration point
c
TemperIP
(dp,sc)
integration point temperatures at
c
current time
c
TemperIPB
(dp,sc)
integration point temperatures at
c
the end of last incremetal step
c
IncStrain
(dp,ar(nTens))
strain for the current substep step when
c
nlgeom = on
c
total strain when nlgeom = off
c
defG0
(dp,ar(3x3))
deformation gradient tensor at the end
c
of last incremental step
c
c
input output arguments
input desc
/ output desc
c
======================
==========
===========
c
defG
(dp, ar(3x3))
deformation gradient tensor at current
c
time, updated for thichness change in
c
plane stress when nlgeom=on
c
kTherm
(int,sc)
flag for thermal loading
c
input as:
c
= 0 if temp = tref
Programmer's Manual for ANSYS . ANSYS Release 11.0 . 002328 . © SAS IP, Inc. All rights reserved.
Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.
125