Download Programmer`s Manual for ANSYS

7.9.27. eelput Subroutine (Storing an Element's Nodal Elastic Strains)
c
c
c
c
c
c
c
c
c
c
c
c
c
ielem
key
(int,sc,in)
- element number (or zero, see below)
(int,sc,in)
- key as to the information needed
= 1 - return info about elastic strains
ielem > 0 - return number of nodal elasic strains
on this element (rec length)
= 0 - return maximum number of nodal elastic
strains on any element
(max rec length)
= DB_NUMDEFINED - return the number of nodal elastic strains
defined in model
output arguments:
eeliqr
(int,func,out)
- the returned value of eeliqr is based on
setting of key
7.9.26. eelget Function (Getting an Element's Nodal Elastic Strains)
*deck,eelget
function eelget (ielem,value)
c *** primary function:
get element nodal elastic strains.
c *** Notice - This file contains ANSYS Confidential information ***
c
c
input arguments:
ielem
(int,sc,in)
c
c
c
c
c
c
output arguments:
eelget
(int,func,out)
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
c
value
- element number
(dp,ar(*),out)
- status of element.
= 0 - element undefined
> 0 - number of nodal elastic strains
returned
- element nodal elastic strains
NOTE: Strains at each corner node in the order
X, Y, Z, XY, YZ, XZ
For solid elements, strains at each
corner node
For shell elements, strains at each
corner node (first top durface, then
bottom)
For layered elements (w/KEYOPT(8)=0),
strains for "first" layer at each
corner node (first at the bottom
surface of the bottom layer, then the
top surface of the top layer).
Strains for "second" layer at each
corner node (first the bottom surface,
then the top surface for the layer with
the largest failure criteria).
The second layer is not present if
failure criteria were not used or are
not appropriate
For layered elements (w/KEYOPT(8)=1),
strains for each layer at each corner
node (first at the bottom surface, then
the top surface)
For beam elements, the contents of this
record is element depenent. See LEPEL
item of ETABLE command.
7.9.27. eelput Subroutine (Storing an Element's Nodal Elastic Strains)
*deck,eelput
subroutine eelput (ielem,nval,value)
c *** primary function:
store nodal elastic strains at an element.
c *** Notice - This file contains ANSYS Confidential information ***
Programmer's Manual for ANSYS . ANSYS Release 11.0 . 002328 . © SAS IP, Inc. All rights reserved.
Contains proprietary and confidential information of ANSYS, Inc. and its subsidiaries and affiliates.
243