Download RKD User Manual

Appendix H. RFA 200 Command
Reference
This is a list of valid commands you can send the RFA 200 from your radio to the RKD.
The OK and ERROR columns indicate how many beeps you will hear on OK and ERROR respectively.
Normal behavior is two beeps for OK and one beep for ERROR.
The Syntax line tells you how you should enter the commands on the RFA 200. The general rule is that an
instruction starts and ends with two pound signs (#,) and each parameter is separated by one pound sign.
Important
Unfinished commands can be cancelled by pressing pound, star: #*
Once you have finished a command by pressing the pound key twice, you can no longer cancel
the command.
If you enter a command that the does not understand, you will hear one error beep.
H.1. System Commands
Syntax:##Command##
Table H.1. Command Reference
Command
Action
OK
ERROR
00
Stop everything
2
1
10
Stop all schedules
2
1
11
Stop all decoders
2
1
H.2. Decoder Commands
Syntax:##Command#Decoder#Time##
Table H.2. Command Reference
Command
Decoder
Time
Action
OK
ERROR
21
1-60
1-999
Activate
decoder
2
1
22
1-60
0
Deactivate
decoder
2
1
H.3. Schedule Commands
Syntax:##Command##Schedule##
202-230-0001/D
125