Download ConsistencyPRO - User Guide

The 275 Communicator
User Interface
F1
F2
F3
F4
SAVE: Save
information to
communicator
SEND: Send data to
device or mark data
to send
On/Off Key
Use this key to power the communicator on and off. When you apply
power, the communicator searches for a HART-compatible device on the
4–20 mA loop.
Note If no device is found, the "No Device Found Press OK" message
appears. Check the connections and press OK (F4) to retry. If a device is
found, the online menu appears. 
Note When performing certain operations, the message "OFF KEY
DISABLED” informs you that the communicator cannot be powered off.
This feature helps avoid situations in which the communicator could be
unintentionally powered off while the output of a device is fixed or when a
user is editing a variable that could affect an output. 
Hot Key
Arrow Keys
Thermo Fisher Scientific
When using a HART-compatible device, you can use the hot key to
customize a menu that contains up to 20 of your most frequently used
menu options. Refer to the communicator’s user manual for instructions.
Use these keys to move through the menus. The up and down arrows also
allow you to scroll through lists of available character input when editing a
field that accepts both alpha and numeric data. You can use the left arrow
to move the cursor to the left or to back out of a menu, and you can use
the right arrow to move the cursor to the right or to perform the selected
menu options.
ConsistencyPRO User Guide
C-3