Download USER MANUAL

5. - EMERGENCY OVERRIDE WITH PIN CODE.
To disarm the system without the remote control proceed as follow:
Press the emergency panel pushbutton for a number of times corresponding to the first digit of the PIN Code. Each
pushbutton pressure is confirmed by a quick flash of the LED. Make a longer pause to let the system understand that
you’ve finished to enter the first digit, a longer flashing of the LED will confirm it. Do the same for the remaining digits, as
soon as all four digits will be entered the system will disarm.
Press for a number of
times equal to the figure
in the PIN code
PIN CODE
SIREN
ON
OK
Short
flash
pause
ALARM
SYSTEM
DISARMED
Long
flash
Enter next
PIN CODE
figure
10
USER MANUAL 4600