Download 2N SIM Star - 2N WIKI

3.6 GSM Menu
The menu is used for GSM channel administration. You can add, remove and edit the
GSM modules and view the SIM cards assigned to them.
Add GSM
Tip
Dark grey column indicates columns with changeable content.
By clicking on it you can change content of table.
The GSM channel is always associated with a gateway and its GSM module. To add a
GSM channel use the Add item in the overview table, which is available to unassigned
modules only.
General info
GSM group – defines a GSM group for the GSM channel to be assigned to.
It is unnecessary to select a GSM group.
Remark – description of the GSM channel for easier orientation in the
configuration.
Disabled – here you can temporarily disable the module use.
SIM card testing – use this option to switch the GSM channel into the SIM
card testing mode. In this mode, no restrictions apply to the SIM card. The
testing modules are marked green in the listing.
Clear ASR – delete the ASR records on the selected module.
Clear ACD – delete the ACD records on the selected module.
Traffic control
Deny outgoing call – bar outgoing calls via the selected module.
Deny outgoing SMS – bar outgoing SMS via the selected module.
Tip
The testing modules are marked green in the overview.
This option is recommended for manual SIM card testing by the
2N® SIM Star system service staff (credit, voice quality, etc.).
Hard linked SIM – the section enables fixed assignment of a SIM card to the
selected gateway GSM module.
Select SIM Board – select the SIM Board where the selected SIM card is
located.
Select SIM card – select a SIM card from the selected SIM Board.
Overview Table
The section provides a table overview of all available GSM channels.
Columns
Id – shows a unique identification number for each GSM channel in 2N®
2N® TELEKOMUNIKACE a.s., www.2n.cz
61