Download Oplink Security TripleShield Hardware Manual

V 2.17t1
Power Source
Source: CR123A 3V
Current: <25uA
Standby Current
PIR Trigger Current
Current: <=15mA
Power Consumption
Consumption: 1 year (Triggered twice a day)
Battery Low Level Indicator
Indicator: 2.1 V-2.35V
Low Battery Alarm Mode
Mode: Low battery alarms
arms only when
sensor alarm is triggered
PIR Trigger Alarm
Alarm: Once Motion Sensor alarms, it will start to
count 3 minutes, and start over again iff any movement is
detected within this period. The next alarm will be triggered
only when no movement is detected within the 3 minutes.
Unpick Detection
Detection: Tamper switch wireless alarm
Siren
Model
Model: SRN1300
Operating Temperature
Temperature: 32° F to 113° F (0°
0° C to 40° C)
De
Device Type: Wireless Indoor Siren
RF Receiver Frequency: 433.92 MHz +/- 0.125MHz
Sensitivity
Sensitivity: -110dbm
Modulation
Modulation: ASK
Power Source
Source: Main Power-AC
AC Adaptor (American Standard);
Standard)
Backup Battery-Alkaline
Alkaline battery “AAA”size * 3pcs
Standby Mode Current
Current: ≤12mA(average) @4.5V
Alarm Mode Current
Current: <[email protected]
Oplink Communications, Inc.
24