Download "user manual"
Transcript
GB SGM X-10 Remote Control External View 01. Contol Module 02. L.C.D. Screen 03. Rubber Keypad 04. Cable For Remote Control (10M/5Pin) 8. CONTROL MODULE OPERATION FOR SGM X-30 MODULE X-30: All the X-10 features plus wireless capability. Wireless operation is possible up to a distance of 50 meters. The address can be set from 0 to 8, which means total 9 different units can be controlled separately or in any combination desired. Press function to cycle to RF mode to select desired address number. Make sure the address setting on the X-30 matches the address setting on the transmitter. There are two buttons on the transmitter. Blue one is to emit fog and Red one is to stop the operation. X-30 Remote Control External View 01. Contol Module 02. L.C.D. Screen 03. Rubber Keypad 04. Cable For Remote Control (2M/5Pin) 05. Securing Knob 06. Antenna 07. Transmiter 9. SGM ON-BOARD DMX MODULE SETTINGS Value 0 - 55 Function OFF 6 - 255 Volume Control (5% - 100%) On Idea Fazer 1000 model, DMX use only 1 channel to control volume output operation. On Idea Fazer 1000 use 2 channels to control both fog volume and fan volume. For IDEA FAZER 1000 the fans have 3 levels of fan operation speed-->low, mid-range, high. Whatever channel you select on the unit, the channel next to it will be selected automatically for fan volume control. Each channel has a value range of 0 to 255. Timer functions such as duration and interval can be programmed using the DMX controller or the DMX control software being used by lighting and effects operator. If Channel has a value from 0 to 5, the unit is OFF. Between the values 6 to 255 the volume of fog output is regulated. With 6 being the minimum volume of fog produced and 255 the maximum. The volume output rises as the DMX value is increased. Note: In the example above, if the machine were assigned the DMX address of 124, Channel would correspond to DMX address 124. So the channel 125 will be used to control the speed of the fan. In general, SGM Idea Fazer 1000 conforms to the following performance specifications: 1. Average Operating temperature = 2500C 2. Idea Fazer 1000 can maintain maximum output for 35-40 seconds or more 6 Idea Fazer 1000