Download SimplIQ Command Reference Manual

SimplIQ Command Reference Manual
Alphabetical Listing
MAN-SIMCR (Ver. 3.0)
0x8
0x4
0x4
Meaning
0
0
0
OK.
0
0
1
Under voltage: The power supply is shut off or it has too high an
impedance.
0
1
0
Over voltage: The power supply voltage is too large, or the servo
drive did not succeed in absorbing the kinetic energy while
braking a load. A shunt resistor may be needed.
1
0
1
Short circuit: The motor or its wiring may be defective.
1
1
0
Temperature: The drive is overheating.
Table 2-35: Servo Drive Status Indications
Attributes:
Type:
Source:
Restrictions:
Unit modes:
Status report, Integer, Bit-field
Program, RS-232, CANopen
None
All
See also:
MF, RR, PM, UM, RM, IP, MS, MO, LC, HM, HY
2-134