Download ECODRIVE DKC01.1/DKC11.1 Drive Controllers

ECODRIVE DKC01.1/DKC11.1 Drive Controllers
P-0-0508, Commutation Offset
Description:
This parameter, with synchronous motors, gives the offset between raw
value of the rotational feedback and the resulting absolute electrical angle
between the stator current vector and the rotor flux vector.
The commutator offset is stored in the motor feedback data memory and
does not need to be entered .
P-0-0508 - Attributes
Name in German:
Kommutierungs-Offset
Name in English:
Commutation -Offset
ID number:
P-0-0508
Function:
Parameter
Memory:
Param.E²prom, Feedb. E²Prom
Data length:
2 Byte
validity check:
Phase3
Format:
DEC_OV
Extreme value check:
no
Unit German/English:
--/--
combination check:
no
Posit. after the dec.:
0
cyc. transmittable:
no
Default value:
--
Input value min / max: 0/10000
Editability:
no
P-0-0509, Slot Angle
Description:
The utilization of this parameter is not currently available.
P-0-0509 - Attributes
Name in German:
Paßfedernutwinkel
Name in English:
SlotAngle
ID number:
P-0-0509
Editability:
no
Function:
Parameter
Memory:
Param.E²prom
Data length:
4 Byte
validity check:
Phase3
Format:
DEC_MV
Extreme value check:
no
Unit German/English:
--/--
combination check:
no
Posit. after the dec.:
0
cyc. transmittable:
no
Default value:
--
Input value min / max: 0/3599
DOK-ECODRV-ASE-02VRS**-FKB1-EN-P • 07.96
Specific Product Parameters
3-17