Download cato® Installation Instructions

Project:
Document Group:
File Name:
Version:
Cato
Integration
Installationsplan_EN
35
●
Never use the KVM amplifier's inlets and outlets with a network hub, network
switch, or with another network card, as it may cause serious damage to the
amplifier!
●
Set the computer's graphic card to a frame rate of 75 Hz.
●
Set the DIP switches to the corresponding resolution and cable length, as described
in the Manual, as otherwise the image will be transferred in poor quality only.
●
In case the image is outshining, adjust brightness with the corresponding potentiometer on the backside of the remote unit.
●
"Double images“ (margins on the vertical edges) can be eliminated by setting the corresponding potentiometers on the backside of the remote unit.
●
Make sure you are turning the potentiometers several times for brightness and
sharpness, for the modifications to become visible.
6.3.3 Data Extender Kit (Printer Amplifier)
By means of the "Data Extender Kit“ (Number 7 in the Figure), parallel printer signals can be
transmitted over larger distances.
The Kit consists of a Sender/Receiver pair. For wiring, use a 1:1 connected RJ12-cable.
6.3.3 RS232 Line Extender
Page 62 of 68