Download MPC8568E MDS Processor Board

2.2.2
2.2.2.1
For PIB Combined Mode
Processor Board as Host on PIB
1. Remove protective covers from the 300-pin connectors (P12, P13, P14, P15) on the bottom side of
the processor board (See Figure 2-4.).
2. Remove protective covers from the 300-pin connectors on the PIB board (see Figure 2-5).
Protective Covers
Remove
protective
covers by
hand
Figure 2-5. Remove Protective Covers from 300-pin
connectors on PIB
Figure 2-4. Remove Protective Covers
from 300-pin connectors on underside of
processor board (P12, P13, P14, P15)
MPC8568E MDS Processor Board, Rev. 0.3
Freescale Semiconductor
2-3