Download User`s Manual

User’s Manual
CAMILEO X200
Introduction
Welcome and thank you for choosing a TOSHIBA product.
For your convenience, your TOSHIBA product is furnished with two
guides:
a) a Quick Start Guide, and
b) this comprehensive PDF User’s Manual.
Contents
Section 1 Getting to Know Your Camcorder......................................... 6
Overview................................................................................. 6
Check the Components......................................................... 6
Safety Instructions................................................................. 7
System Requirements........................................................... 7
Front View . ............................................................................ 8
Rear View................................................................................ 8
Side View................................................................................ 9
Bottom View........................................................................... 9
Section 2 Getting Started...................................................................... 10
Loading the Battery............................................................. 10
Charge your battery............................................................. 10
Inserting and Removing an SD Card (Optional)................ 11
Turning the Camcorder On and Getting Started............... 12
Turning the Camcorder Off................................................. 12
Section 3 Record Mode......................................................................... 13
Button Function................................................................... 13
LCD Monitor Information..................................................... 14
Video Recording.................................................................. 17
Photo Capturing................................................................... 17
Using Digital Light or Light Function................................. 17
Using Zoom Function.......................................................... 18
Using Advanced Zoom Function ....................................... 18
Options for Menu................................................................. 19
Operations ........................................................................... 19
VIDEO SETTING................................................................... 20
PHOTO SETTING.................................................................. 25
EFFECTS............................................................................... 29
DELETE................................................................................. 33
Contents
Section 4 Playback Mode..................................................................... 35
Button Function................................................................... 35
LCD Monitor Information..................................................... 36
Operations for Playback Mode .......................................... 38
Video Playback..................................................................... 39
Photo Playback.................................................................... 39
Delete File in Playback Mode.............................................. 39
Video Trim............................................................................. 40
Section 5 Setting Your Camcorder ..................................................... 41
Setup Menu........................................................................... 41
Section 6 Viewing Photos and Videos on TV...................................... 44
Connecting to a High-Definition 16:9(Wide) TV................ 44
Section 7 Viewing Photos and Videos on PC..................................... 45
Installing Bundled Software................................................ 45
Transferring Photos or Videos to a Computer.................. 45
Section 8 Uploading Files to Internet.................................................. 46
Section 9 Webcam Mode...................................................................... 49
Contents
Section 10 Specifications .................................................................... 50
Section 11 Troubleshooting.................................................................. 51
Section 12 Other Information............................................................... 52
TOSHIBA Support................................................................ 52
Warranty................................................................................ 52
Operating Environment Conditions................................... 52
Additional Information......................................................... 53
About the battery pack........................................................ 53
5
EN
Section 1
Getting to Know Your Camcorder
Overview
The camcorder with 8 Mega Pixel sensor can take H.264 videos. By way of using H.264 technology, more
videos can be taken within certain amount of memory. High quality images with up to 16 mega-pixels
can also be delivered smoothly. With a color LCD monitor, users can compose images and examine
them easily.
The camcorder features 3” LCD touch panel which is an ideal platform for you to operate your camcorder.
The menu options are accessible with your finger. With the touch panel, you can select the options
directly and quickly.
The camcorder also features video recording at HD resolution of 1920x1080. You can also connect it to
an HDTV via an HDMI cable, and easily playback the recorded high-definition videos on the wide screen
HDTV.
Moreover, the camcorder has an advanced uploading feature. With the exclusive built-in CAMILEO
UPLOADER application, you can upload the videos or photos captured by the camcorder to Internet
more effortlessly.
ISO sensitivity and color balance can either be adjusted automatically or changed manually for varying
light conditions. A 12× optical zoom helps you to control over the videos and photos you take.
The varied effect options, such as Time Lapse and Slow Motion, make recording more fun.
This camcorder integrates basic editing function to edit the video without the need for a PC. The function
of Cut and Save as New enables immediate video editing.
The built-in memory provides you to take photos and to record videos without a memory card. The
memory card slot allows users to increase the storage capacity.
Note
• Partial memory of the built-in memory is used for the camcorder’s Firmware code.
Check the Components
Unpack the package and make sure all standard accessories listed are included:
Camcorder
Quick Start Guide
USB Cable
CD-ROM
(Software &
User’s Manual)
HDMI Cable
AC-Adaptor
Cleaning Cloth
Lithium-ion
n
Lens Cover Set
Rechargeable
(Lens cover
Battery*
& strap)
Cloth Bag
Remote Control
Warranty Leaflet
AV Cable
*preinstalled in camcorder device
Note
Please remove the lens protect film on lens before use.
6
EN
Safety Instructions
1. Do not drop, puncture or disassemble the camcorder; otherwise the warranty will be voided.
2. Avoid all contact with water, and dry hands before using.
3. Do not expose the camcorder to high temperature or leave it in direct sunlight. Doing so may
damage the camcorder.
4. Use the camcorder with care. Avoid pressing hard on the camcorder body.
5. For your own safety, avoid using the camcorder when there is a storm or lightning.
6. Do not use batteries of different specifications. Doing so may lead to the potential for serious
damage.
7. Remove the battery during long periods between usage, as a deteriorated battery may affect the
functionality of the camcorder.
8. Remove the battery if it shows signs of leaking or distortion.
9. Use only the accessories supplied by the manufacturer.
10. Keep the camcorder out of the reach of infants.
11. Risk of explosion if battery is replaced by an incorrect type.
12. Dispose of used batteries according to the instructions.
System Requirements
OS
Microsoft Windows XP, Vista, 7
CPU Intel Pentium 4, 2.4GHz or above
512MB system memory
Hardware
1GB hard disk space
4x CD-ROM
1x available USB port
16-bit Color Display
Note
The LCD screen is manufactured using extremely high-precision technology. However, some
tiny black and/or bright dots (white, red, blue or green) may appear on the LCD screen.
These dots are a normal result of the manufacturing process, and do not affect the recording.
7
EN
Front View
[Photo] Button
[Tele]/[Wide] Button
Speaker
Light
LCD Touch Panel
Lens
IR Receiver
Microphone
Rear View
Indicator Light
[Pause] Button
Mini USB 2.0 Port
[Video] Button
HDMI Port
8
EN
Side View
[Power] Button
[Playback]
Button
Microphone Jack
[Light] Button
Bottom View
Battery/SD card Cover
Tripod Socket
9
EN
Section 2
Getting Started
Loading the Battery
The battery comes pre-installed in the camcorder, however you
must remove the insulator on the battery before use.
1.Slide the safety latch and open the battery cover.
2.Remove the battery from the camcorder and pull the insulator
off.
3.Insert the battery according to the correct polarity marks ( + or
-).
4.Close the battery cover firmly.
REMOVE
Charge your battery
You must use the supplied AC charger or the USB cable. The camcorder must be turned OFF. A
blinking light indicates active charging and a solid light indicates that charging is complete.In AC
charging mode, the full charging time is about 4- 5 hours and the light will turn off automatically after 3~5
minutes.(Actual charging time may vary. It depends on the battery condition.)
10
EN
Inserting and Removing an SD Card (Optional)
The camcorder comes with internal memory which allows you to store photos and videos. You can
expand the memory capacity by using an optional SD memory card.
1.Open the SD Card cover.
2.Insert the memory card into the slot. Please refer to the figure on the
right side.
3.To remove the installed SD card, press the card inwards to release
it.
4.When the card pops out, gently remove it from its slot.
5.Recommended memory capacity: 1GB or above.
Note
• When a memory card is fitted, videos/photos are saved on the card rather than on the built-in
memory.
• Protecting Data on an SD Card: SD Card is read-only when it is locked. No photos or videos
can be recorded when the SD card is locked. Make sure the lock is on the writeable position
before recording any media.
Writeable
position
11
Write-Protected
Position
EN
Turning the Camcorder On and Getting Started
• To turn on the camcorder:
1. Flip out the LCD panel; the camcorder will turn on automatically.
2. Or press the [Power Button] for one second to turn it on.
• To record video: Press the [Video Button] to record video. To stop recording, press it again.
• To pause recording: Press the [Pause Button] to pause recording. To continue the recording, press it
again.
• To snapshot a photo during video recording: Press the [Photo Button] to capture the image.
• To take a photo: Press the [Photo Button] halfway down until the focusing frame turns green. Then,
press it fully down to take photo.
Focusing Frame: White
Focusing Frame: Green
• To view stored videos and photos: Press the [Playback Button] or touch
switch to the Playback mode.
(on-screen icon) to
Turning the Camcorder Off
• To turn off the camcorder: You can either press [Power Button] for one second, or you can place the
LCD panel back to its original position.
12
EN
Section 3
Record Mode
Button Function
Video Button:
1.Press to begin recording a video.
2.Press it again to stop recording.
Pause Button:
1. Press to pause the recording.
2. Press it again to resume recording on the same file.
Photo Button:
1. Press halfway down to focus, then press it fully to take the photo.
2. When recording video, press to capture the image.
Tele Button:
1.Zoom In.
Wide Button
1.Zoom out.
Power Button:
1. Press down for one second to turn on or turn off the camcorder.
Playback Button:
1. Toggle the Record Mode and Playback Mode.
Light Button:
1. Press to toggle the Light settings. (LIGHT ON/ LIGHT OFF/ DIGITAL
LIGHT).
13
EN
LCD Monitor Information
The indicators shown below may display on LCD when videos and photos are recorded:
On-screen information icon
On-screen touchable function icon
Battery: full power
Battery: medium power
(1)
Battery: low power
Battery: empty power
DC power mode (The camcorder is turned on and plugged in the AC
charger.)
(2)
Macro Position Focusing
00:03:12
Recording time
00:03:12
Pause recording
(3)
(4)
250
The remaining amount of photos that can be taken at the current
resolution.
321
Number of current photo
Motion Detection (Video Record Mode Only)
Scene
(5)
Skin
Night
14
EN
Manual White Balance
Daylight
(6)
Fluorescent
Tungsten
Zoom meter:
(7)
1×~1200× (20× advanced zoom and 60× Digital zoom) (Available for
Advanced Zoom activated in FULL HD 1080/30 video recording)
1×~900× (15× advanced zoom and 60× Digital zoom) (Available for
Advanced Zoom activated in other video recording)
1×~720× (12× optical zoom and 60× Digital zoom) (Available for photo)
Slow Motion (Video Record Mode Only)
(8)
Time Lapse (Video Record Mode Only)
Pre-Record Mode (Video Record Mode Only)
Digital Light On
(9)
Light On
Light Off
20× Advanced Zoom On (only available for FULL HD 1080/30)
20× Advanced Zoom Off
(10)
15× Advanced Zoom On
15× Advanced Zoom Off
15
EN
Video Resolution
FULL HD 1080/30
60p
30p
HD 720/60
HD 720/30
VGA 480/30
(11)
WQVGA (When Slow Motion function is activated, the video resolution is
WQVGA(432× 240).)
Photo Resolution
High-16MP
Standard-8MP
Low-3MP
Video Record Mode
Backlight On/ Off
(12)
Photo Record Mode
Self-timer On/ Off
(13)
Menu On
(14)
Playback Mode On
(15)
Photo Mode On
(16)
Video Mode On
(17)
Delete Mode On
Note
• Tap on the screen to close the touchable function bars. Tap again to show the bars.
• Filter: Black & White / Classic / Negative can be previewed immediately without the indicator
on the LCD screen.
• Stabilization, Time Lapse, and Slow Motion functions can not be used simultaneously.
• Stabilization and Night Mode functions can not be used simultaneously.
• Pre-Record, Motion Detection, Time Lapse, and Slow Motion functions can not be used
simultaneously.
• Motion Detect, Time Lapse, Slow Motion, and Pause functions can not be used
simultaneously.
• The camcorder does not power off automatically in DC power mode.
16
EN
Video Recording
• Press the [Video Button] to start recording. When a video is being recorded, a time indicator will
display on the LCD monitor. To stop recording, press the [Video Button] again.
• To pause recording: Press the [Pause Button] to pause recording. To continue the recording, press it
again.
• To snapshot a photo during video recording: Press the [Photo Button] to capture the image.
• Press the [Playback Button] or touch
(on-screen icon) to view the recorded video.
• Four resolution settings are available:
Video Quality
FULL HD 1080/30: 1920x1080p 30
HD 720/60: 1280x720p 60
60p
HD 720/30: 1280x720p 30
30p
VGA 480/30: 640x480p 30
Note
• The image resolution captured during video recording is the same as the video resolution.
Photo Capturing
• Press the [Photo Button] halfway down until the focusing frame turns green. Then, press it fully down
to take photo.
• Press the [Playback Button] or touch
(on-screen icon) to view the recorded video.
• Three resolution settings are available:
Image Quality
HIGH-16 Mega Pixels: 4608 x 3456
STANDARD-8 Mega Pixels: 3264 x 2448
LOW-3 Mega Pixels: 2048 x 1536
Using Digital Light or Light Function
• The setting allows you to brighten the area or to extend the brightness of the objects.
1.Press to toggle the Light settings. (LIGHT ON/ LIGHT OFF/ DIGITAL LIGHT ).
• When the Light function is activated (
) the light will be turned on and keeps providing light.
• When the Digital Light function is activated (
) , the camcorder extends dynamic range for
backlight and high contrast sense so that the objects will be brighter and clearer.
2.Press the [Video]/[Photo] Button to start recording or to take photo.
Note
• To avoid the persistence of image on the screen, please turn off the Digital Light function after
you used it in the dark situation.
• The light will be disabled automatically when battery power is low (
17
).
EN
Using Zoom Function
• The zoom magnifies images when recording video or taking photo.
1.To zoom in/out, press the [Tele/Wide Button]. The camcorder will zoom in by optical zoom first.
When the optical zoom factor is at maximum, zooming stops temporarily. When you want to zoom in
beyond the optical zoom range, hold the [Tele Button] again, the digital zoom will be activated and
zooming continues.
2.It can be set from 1×~720× (12× optical zoom and 60× Digital zoom)
Using Advanced Zoom Function
• In addition to the 12x optical zoom range, the advanced sensor transforms the 12x optical zoom into
the higher advanced zoom. The advanced zoom obtains a larger zoom range without any deterioration
of the video quality. Once the advanced zoom is activated, the viewfinder displays wider angle scene
and you can record the farther subjects by zooming in.
1. When you are going to record video, touch the on screen icon to activate advanced zoom.
Available Video Quality
Advanced Zoom
Function
The magnification is approximately 1.66 times and
the lens is enhanced to be 20× advanced zoom.
When recording video, press the Tele/Wide Button
and it can be set from 1×~1200× (20× advanced
zoom and 60× Digital zoom)
60p
30p
Normal
The magnification is approximately 1.25 times and
the lens is enhanced to be 15× advanced zoom.
When recording video, press the Tele/Wide Button
and it can be set from 1×~900× (15× advanced
zoom and 60× Digital zoom)
12x Optical Zoom
Advanced Zoom
Note
• The advanced zoom is only available for video recording.
18
EN
Options for Menu
VIDEO SETTING
PHOTO SETTING
•LIGHT
•RESOLUTION
•STABILIZATION
•MOTION
DETECTION
•FACE TRACKING
•SLOW MOTION
•PRE-RECORD
•TIME LAPSE
•DATE PRINTING
•CONTINUOUS
PLAY
•LIGHT
•RESOLUTION
•SELF-TIMER
•SMILE
DETECTION
•DATE PRINTING
•ISO
•SLIDESHOW
EFFECTS
•MACRO MODE
•EXPOSURE
MEASURE
•SCENE
•FILTER
•WHITE
BALANCE
SETUP*
DELETE
•MENU SOUND
•TV
•LANGUAGE
•TIME
SETTING
•FORMAT
•DEFAULT
SETTING
•DELETE VIDEO
•DELETE PHOTO
•SELECT &
DELETE
•DELETE ALL
* Please refer to Section 5 for the detailed information about [Setup].
Operations
Operation
1.Touch
Screen
on the screen.
2.The main menu will appear.
3.The options are VIDEO SETTING, PHOTO
SETTING, EFFECTS, SETUP, and DELETE.
4.Touch the desired icon twice or hold it down.
5.The option menu will pop up on the screen.
6.Touch to select the specific option you want to adjust
and touch again to enter its setting menu.
7.Touch twice or hold it down to validate the setting.
8.Or touch the RETURN icon (
) twice (hold it
down) to exit.
19
EN
VIDEO SETTING
Operation
Display Screen
on the screen. The main menu
1. Touch
will show on the screen.
2. Touch the [VIDEO SETTING
] icon twice on
the screen to enter its setting menu.
3. The Video Setting menu contains 10 options-LIGHT, RESOLUTION, STABILIZATION,
MOTION DETECTION, FACE TRACKING,
SLOW MOTION, PRE-RECORD, TIME
LAPSE, DATE PRINTING, and CONTINUOUS
PLAY --for you to adjust the camcorder
settings.
LIGHT
You can select the mode to brighten the shooting area or to extend the brightness of objects.
ON
The light will be turned ON and provides light when recording.
OFF
The light is turned OFF.
DIGITAL LIGHT
Extend the dynamic range for backlight and high contrast sense, so that
the objects will be brighter and clearer.
Operation
Display Screen
1. In the Video Setting menu, touch the [LIGHT]
icon twice.
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
20
EN
RESOLUTION
Four resolution settings are available.
Full HD 1080/30
Record videos at 1920x1080p 30 resolution.
HD 720/60
Record videos at 1280x720p 60 resolution.
HD 720/30
Record videos at 1280x720p 30 resolution.
VGA 480/30
Record videos at 640x480p 30 resolution.
Operation
1. In the Video Setting menu,
[RESOLUTION] icon twice.
Display Screen
touch
the
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
STABILIZATION
Record with an effect of reducing camcorder shake to result in more stable videos.
Operation
Display Screen
1. In the Video Setting menu, touch the
[STABILIZATION] icon twice.
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
MOTION DETECTION
Record video automatically when the camcorder detects a movement.
Operation
Display Screen
1. In the Video Setting menu, touch the [MOTION
DETECTION] icon twice.
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
5. The camcorder will start to record video
automatically if it detects movement. It stops
recording when no movement is detected.
21
EN
FACE TRACKING
The camcorder can detect human face(s) and focus on the face(s) automatically. It is wonderful for
capturing portraits in backlit conditions.
Operation
Display Screen
1. In the video Setting menu, touch the [FACE
TRACKING] icon twice.
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
5. In Record Mode, aim the camcorder at the
face(s). The face frame(s) will appear around
the face.
SLOW MOTION
Record videos with slow motion effect. When the video is played, the playback time will be longer than
the actual recording time.
Operation
Display Screen
1. In the Video Setting menu, touch the [SLOW
MOTION] icon twice.
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
Note
• While Slow Motion function is activated, audio is not recorded and zoom is disabled.
• The view angle may become smaller when the Slow Motion is activated.
• When Slow Motion function is activated, the video resolution is WQVGA.
22
EN
PRE-RECORD
The Pre-record function ensures that you will not miss any critical recording opportunity. The camcorder
records a few seconds more before the [Video] Button is pressed.
Operation
Display Screen
1. In the Video Setting menu, touch the [PRERECORD] icon twice.
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
Note
• Be sure to aim the camcorder at the subject and position it securely before the [Video Button]
is pressed.
• Once the Pre-Record function is activated, it will be disabled when you setup any other video
setting.
TIME LAPSE
Record still images at specific intervals you can set and play them as one video file.
OFF
Disable Time Lapse.
1 SECOND
Record one frame per second.
3 SECONDS
Record one frame every 3 seconds.
5 SECONDS
Record one frame every 5 seconds.
Operation
Display Screen
1. In the Video Setting menu, touch the [TIME
LAPSE] icon twice on the screen.
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
23
EN
DATE PRINTING
Imprint the date and time on the file.
Operation
Display Screen
1. In the Video Setting menu, touch the [DATE
PRINTING] icon twice.
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
5. As the function is activated, the date will
appear on the corner of the video.
CONTINUOUS PLAY
Playback the video files continuously.
Operation
Display Screen
1. In the Video Setting menu, touch the
[CONTINUOUS PLAY] icon twice.
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
24
EN
PHOTO SETTING
Operation
Display Screen
on the screen. The main menu
1. Touch
will show on the screen.
2. Touch the [PHOTO SETTING
] icon twice on
the screen to enter its setting menu.
3. The Photo Setting menu contains 7 options-LIGHT, RESOLUTION, SELF-TIMER, SMILE
DETECTION, DATE PRINTING, ISO, and
SLIDESHOW--for you to adjust the camcorder
settings.
LIGHT
You can select the mode to brighten the shooting area or to extend the brightness of objects.
ON
The light will be turned ON and provides light when recording.
OFF
The light is turned OFF.
DIGITAL LIGHT
Extend the dynamic range for backlight and high contrast sense, so that
the objects will be brighter and clearer.
Operation
Display Screen
1. In the Photo Setting menu, touch the [LIGHT]
icon twice.
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
25
EN
RESOLUTION
Three resolution settings are available.
HIGH-16MP
Shoot photo at 4608 x 3456, 16 Mega Pixels quality.
STANDARD-8MP
Shoot photo at 3264 x 2448, 8 Mega Pixels quality.
Low-3MP
Shoot photo at 2048 x 1536, 3 Mega Pixels quality.
Operation
1. In the Photo Setting menu,
[RESOLUTION] icon twice.
Display Screen
touch
the
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
SELF-TIMER
The self-timer allows you to take photo with a ten-second time delay.
Operation
Display Screen
1. In the Photo Setting menu, touch the [SELFTIMER] icon twice.
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
26
EN
SMILE DETECTION
The camcorder capture the photo automatically when it detects a smile.
Operation
Display Screen
1. In the Photo Setting menu, touch the [SMILE
DETECTION] icon twice.
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
5. In Record Mode, aim the camcorder at the
smiling faces. The face frames will appear
around the face with smile.
6. The camcorder will focus on the subject.Then,
the it will capture the photo automatically.
DATE PRINTING
Imprint the date and time on the file.
Operation
Display Screen
1. In the photo Setting menu, touch the [DATE
PRINTING] icon twice.
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
5. As the function is activated, the date will
appear on the corner of the photo.
27
EN
ISO
The camcorder adjusts the ISO sensitivity of its images automatically. Four manual ISO sensitivity
settings are available. (800/1600/3200/6400). The larger the number, the higher the ISO sensitivity.
Select the lower setting to shoot a smoother image. Select the higher setting to shoot a photo in a dark
poorly lit location, or to shoot a subject moving at a high rate of speed.
Auto
Set the ISO sensitivity automatically.
800
ISO 800
1600
ISO 1600
3200
ISO 3200
6400
ISO 6400
Operation
Display Screen
1. In the Photo Setting menu, touch the [ISO] icon
twice.
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
Note
The image may become grainy with a higher ISO setting.
SLIDESHOW
Display photos one after another in turn.
2 SECONDS
Display one photo every 2 seconds.
5 SECONDS
Display one photo every 5 seconds.
10 SECONDS
Display one photo every 10 seconds.
OFF
Disable Slideshow.
Operation
Display Screen
1. In the Photo Setting menu, touch the
[SLIDESHOW] icon twice.
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
28
EN
EFFECTS
Operation
Display Screen
1. Touch
on the screen. The main menu
will show on the screen.
2. Touch the [EFFECTS
] icon twice on the
screen to enter its setting menu.
3. The Effects menu contains 5 options-- MACRO
MODE, EXPOSURE MEASURE, SCENE,
FILTER, and WHITE BALANCE --for you to
adjust the camcorder settings.
MACRO MODE
The camcorder adjusts the focus automatically. As you activate this function, the camcorder adjusts the
focus with priority on close- up objects.
Operation
Display Screen
1. In the Effects menu, touch the [MACRO MODE]
icon twice.
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
29
EN
EXPOSURE MEASURE
Exposure is the amount of light that the camcorder receives from the scene. The camcorder adjusts the
exposure automatically. Two manual modes are provided: CENTER and SPOT.
AUTO
The camcorder meters the light in an
average value for the overall scene and
adjusts the exposure automatically. This
setting is suitable for the normal condition.
CENTER
The camcorder still meters the light in an
average value for the entire scene, but
gives greater weight to the center. In this
way, the center part will get more clear and
the surrounding may become dark.
SPOT
The camcorder only meters the light in
the middle spot of the scene. This setting
is typically used in capturing the light of
candle.
Operation
Display Screen
1. In the Effects menu, touch the [EXPOSURE
MEASURE] icon twice.
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
30
EN
SCENE
You can select the mode according to the scene condition.
AUTO
Automatic adjustment
SKIN
Shoot with an effect that makes skin tones more natural.
NIGHT
Use Night Mode for night scenes or low light conditions.
BACKLIGHT
You can take shots when the bright light is behind the subject.
Operation
Display Screen
1. In the Effects menu, touch the [SCENE] icon
twice.
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
Note
To avoid blurry photos, place the camcorder on a flat, steady surface, or use a tripod when taking
shots in the Night Mode.
FILTER
You can select the special filter effects on the videos or photos.
AUTO
Shoot without any special effect on the image.
BLACK & WHITE
The image is converted to black-and-white.
CLASSIC
The image is converted to a sepia look.
NEGATIVE
The image is converted as the negative of the normal.
Operation
Display Screen
1. In the Effects menu, touch the [FILTER] icon
twice.
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
31
EN
WHITE BALANCE
The camcorder adjusts the color balance of images automatically. Three manual white balance settings
are available:
AUTO
The camcorder automatically adjusts white balance.
DAYLIGHT
Under outdoor condition.
FLUORESCENT
Under fluorescent light condition.
TUNGSTEN
Under tungsten light condition.
Operation
Display Screen
1. In the Effects menu, touch the [WHITE
BALANCE] icon twice.
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
32
EN
DELETE
Operation
Display Screen
on the screen. The main menu
1. Touch
will show on the screen.
2. Touch the [DELETE
] icon twice on the
screen to enter delete menu.
3. The Delete menu contains 4 options-- DELETE
VIDEO, DELETE PHOTO, SELECT & DELETE,
and DELETE ALL --for you to manage the
videos and photos in the built-in memory or the
SD card.
DELETE VIDEO
Operation
Display Screen
1. In the Delete menu, touch the [DELETE VIDEO]
icon twice.
2. In the video thumbnail screen, touch to select
the desired video(s). (The check mark(s) will be
shown on the selected file(s).)
3. Touch
to delete the selected video(s).
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
DELETE PHOTO
Operation
Display Screen
1. In the Delete menu, touch the [DELETE PHOTO]
icon twice.
2. In the photo thumbnail screen, touch to select
the desired photo(s). (The check mark(s) will be
shown on the selected file(s).)
3. Touch
to delete the selected photo(s).
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
33
EN
SELECT & DELETE
Operation
Display Screen
1. In the Delete menu, touch the [SELECT &
DELETE] icon twice.
2. In the video & photo thumbnail screen, touch to
select the desired file(s). (The check mark(s) will
be shown on the selected file(s).)
3. Touch
to delete the selected file(s).
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
DELETE ALL
Use this option to delete all of the videos and photos
YES
NO
Delete all of the videos and photos in the built-in memory (When no SD card is
installed )
Delete all of the videos and photos on the SD card (When an SD card is installed).
Do not delete all of the videos and photos in the built-in memory (When no SD
card is installed )
Do not delete all of the videos and photos on the SD card (When an SD card is
installed).
Operation
Display Screen
1. In the Delete menu, touch the [DELETE ALL]
icon twice.
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
Note
• When an SD Card has been installed, only the videos and photos stored on the card are
deleted.
• Videos or photos cannot be deleted if the card is write-protected.
34
EN
Section 4
Playback Mode
Button Function
The Buttons have the following functions in Playback Mode.
Video Button:
1.Press to go the Record Mode.
Photo Button:
1. Press to go the Record Mode.
Tele Button:
1.Volume increase.
Wide Button
1.Volume decrease.
Power Button:
1. Press down for one second to turn on or turn off the camcorder.
Playback Button:
1. Toggle the Record Mode and Playback Mode.
35
EN
LCD Monitor Information
Indicators on the LCD screen while in Playback Mode:
On-screen information icon
On-screen touchable function icon
Battery: full power
Battery: medium power
(1)
Battery: low power
Battery: empty power
DC power mode
00:03:12
(2)
Playback time counter
321
Number of current photo
250
Total number of photos
(3)
Volume
Video playback mode
(4)
Photo playback mode
(5)
Video Trim Mode On
Video Playback Mode
Indicate the function of continuous play on or off
(6)
Photo Playback Mode
Indicate the function of slideshow on or off
(7)
Select & Play thumbnail screen On
36
EN
(8)
Menu On
(9)
Return to the Record Mode
(10)
Go to the previous file. Videos fast rewind
Play the file
(11)
Pause
(12)
Go to the next file. Videos fast forward.
(13)
Delete the current file.
(13)
Stop video playing. Stop photo slideshow
Note
• Tap on the screen to close the touchable function bars. Tap again to show the bars.
37
EN
Operations for Playback Mode
The Playback Mode is for viewing and managing videos and photos on the built-in memory or on an SD
ard.
Operation
Display Screen
1. In Record Mode, press [Playback Button] or
to switch to the Playback Mode.
touch
2. Touch
Touch
to go to the previous video/photo;
to go to the next video/photo.
3. Touch
to open the menu. (Please refer
to section3.)
4. Touch
to open the thumbnail screen of
videos and photos.
5. In the thumbnail screen of videos and photos,
select the file(s) you want to play, and then
touch
to confirm. (The check mark(s) will
be shown on the selected file(s).)
6. Or touch the RETURN icon (
) twice (hold
it down) to exit.
7. Touch
to play the selected files.
(Video:full length. Photo:2 seconds.)
38
EN
Video Playback
Operation
Display Screen
/
1. In the Video Playback Mode, touch
to play or pause the video.
2. Touch
to go to the previous file; touch
to go to the next file.
3. While playing videos, touch
/
to
fast rewind/forward.
4. In the Continuous Play On Mode (
is
highlighted ), touch
to play the all video
files continuously. Touch
to stop
playing.
5. Use Tele / Wide Buttons to adjust the volume.
Photo Playback
Operation
Display Screen
1. In the Photo Playback Mode, touch
to
go to the previous file; touch
to go to the
next file.
2. In the Slideshow On Mode (
highlighted ), touch
/
pause the slideshow. Touch
slideshow.
is
to play or
to stop
Delete File in Playback Mode
Operation
1. In Playback Mode, touch
2. Touch
3. Or touch
Display Screen
on the screen.
to delete the current photo.
to cancel the operation and exit.
Note
• Videos and Photos on a written-protected memory card cannot be deleted.
39
EN
Video Trim
You can trim away the beginnings and ends of the recorded video and save it as a new video clip.
Operation
Display Screen
1. In Video playback mode, press the right-most
] icon on the top.
[CUT
1. Touch the dividing icon (
/
) ( the icon
becomes yellow ) on the bar to specify the
beginning and the end.
2. Touch the rewind /forward (
/
) icon
to fine-tune the dividing point.
3. You can preview the video by touching
/
to play or pause the video. Touch
to stop playing.
4. Touch the [SAVE AS NEW
] icon on the
top menu bar to trim away the black portion and
save the green portion as a new video file.
5. Or touch the [RETURN]
icon to exit.
Video Flow:
Specify the dividing icon (
/
) where the video clip is to be cut.
Portion A and C will be cut, and portion B will be saved as a new video clip.
40
EN
Section 5
Setting Your Camcorder
Setup Menu
Operation
Display Screen
1. Touch
on the screen. The main menu
will show on the screen.
2. Touch the [Setup
] icon twice on the screen
to enter its setting menu.
3. The Setup menu contains 6 options for configuring
your camcorder setup. They are MENU SOUND
(operation sound), TV, LANGUAGE, TIME
SETTING, FORMAT, and DEFAULT SETTING.
MENU SOUND
Enable or disable the keypad tone and the operation sound.
Operation
Display Screen
1. In the Setup menu, touch the [MENU SOUND]
icon twice.
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
TV
Ensure that the appropriate TV standard of your area is selected – either NTSC or PAL. Wrong TV
system setting may cause image flickers.
NTSC(60Hz)
USA, Canada, Japan, South Korea and Taiwan, etc.
PAL(50Hz)
UK, Europe, China, Australia, Singapore and Hong Kong, etc.
Operation
Display Screen
1. In the Setup menu, touch the [TV] icon twice.
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
41
EN
LANGUAGE
Use this option to select the language of the user interface.
Operation
Display Screen
1. In the Setup menu, touch the [LANGUAGE] icon
twice.
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
TIME SETTING
Operation
Display Screen
1. In the Setup menu, touch the [TIME SETTING]
icon twice.
2. Touch Year, Month, Day, Hour, or Minute to set..
3. Adjust the numeric value by touching the
arrows.
4. Touch
to validate the setting.
5. Or touch the RETURN icon (
) twice (hold
it down) to exit.
FORMAT
Use this option to erase all data in the built-in memory or the SD card.
YES
NO
Format the built-in memory (When no SD card is installed ) / SD card (When an
SD card is installed).
Do not format the built-in memory (When no SD card is installed ) / SD card (When
an SD card is installed).
Operation
Display Screen
1. In the Setup menu, touch the [FORMAT] icon
twice on the screen.
2. Touch to select the desired option.
3. Touch again to validate the setting.
4. Or touch the RETURN icon (
) twice (hold
it down) to exit.
Note
All the data will be erased if the SD card is formatted. Make sure all the data are copied to your
PC before formatting the SD card.
42
EN
DEFAULT SETTING
Use this option to restore the default factory setting.
YES
Restore default factory setting.
NO
Do not restore default factory setting.
Operation
Display Screen
1. In the Setup menu, touch the [DEFAULT
SETTING] icon on the screen to enter the
confirmation screen.
2. Touch the [Yes] icon to execute the operation
and the [No] icon to cancel the operation.
3. Or touch the RETURN icon (
) twice (hold
it down) to exit.
The following table indicates the camcorder’s default settings
Setting
Resolution
Default Factory Setting
Full HD 1080/30 for Video
Standard- 8M for Photo
Light
Off
Stabilization
On
Motion Detection
Off
Face Tracking
Off
Slow Motion
Off
Pre-Record
Off
Time Lapse
Off
Continuous Play
Off
Self-Timer
Off
Smile Detection
Off
Date Printing
Off
ISO
Auto
Slideshow
Off
Macro Mode
Off
Exposure Measure
Auto
Scene
Auto
Filter
Auto
White Balance
Auto
Menu Sound
On
TV
Depends on shipping area
Language
Depends on shipping area
Volume
Level 4
43
EN
Section 6
Viewing Photos and Videos on TV
Connecting to a High-Definition 16:9(Wide) TV
1.Connect the HDMI cable to your camcorder’s HDMI port.
2.Connect the other end of the cable to a HDTV.
3.Set the video input source of your TV to “ HDMI.”
4.The steps for viewing stored videos and photos on an HDTV are exactly the same as for viewing them
on the LCD monitor.
(16:9)
Note
Some functions may not be accessible while the camcorder is connected to an HDTV.
The camcorder can not run thumbnail screen while the camcorder is connected to an HDTV.
44
EN
Section 7
Viewing Photos and Videos on PC
Installing Bundled Software
The CD-ROM supplied with this camcorder contains 2 pieces of software.
• ArcSoft MediaImpression is a user-friendly application that helps you managing your media and
uploading your files to the web sites easily.
• Adobe Reader is a popular program that you need to have installed to read the User’s Manual. Many
computer users will find they already have this software installed on their computer.
To install the bundled software:
1.Insert the CD-ROM into your computer’s CD-ROM drive. The autorun screen appears.
2.Click “Install Application Software”. Follow the on-screen instructions to complete the installation.
Note
• Detailed information can be found in the online help of all the bundled software.
• Install the bundled software application, ArcSoft MediaImpression, for viewing the videos
correctly on a PC.
Transferring Photos or Videos to a Computer
You can transfer photos or videos stored on your camera to a computer and send them in e-mails to
friends or post them on the web sites.
To do this you should:
1. Connect the computer and camera with the supplied mini USB 2.0 cable. .
2. To access photos and videos on your SD card: Videos and photos can be found on your computer
at My Computer\ SD\DCIM\100MEDIA (path will vary depending on name of SD card).
3. To access photos and videos in the camcorder’s internal memory: Videos and photos can be found
on your computer at My Computer\DV\DCIM\100MEDIA
4. Under this folder, you can view, delete, move, or copy any video/photo you want.
45
EN
Section 8
Uploading Files to Internet
The built-in CAMILEO Uploader application offers you an easy way to upload your files to the social
websites instantly. It helps you share them with your family and friends on the web sites. Also, the
bundled software, ArcSoft MediaImpression, can be used to upload your files to the web sites.
CAMILEO Uploader
To upload files to Internet:
1. Connect the camcorder to your computer by using the supplied USB cable.
2.After making a USB connection, the AutoPlay window will appear. (It may be different based on OS
recognition. If the AutoPlay window does not appear. Please click [My Computer]-->[DVAP]-->[DVAP.
exe] to execute the application.)
3.The main screen appears automatically on the desktop.
Note
• If ArcSoft MediaImpression is not installed, you may be asked to install the H.264 Codec
(ffdshow-a free software under GPL license) for viewing the videos on CAMILEO Uploader
correctly.
46
EN
4. Choose the website you want to upload.
5. Click on [VIDEOS]/[PHOTOS] to go to the videos/ photos thumbnail page. Scroll the bar to change
the pages.
6. Click on the files you want to upload. Click on [Select All]/[Deselect All] to select/deselect all video
or photo files shown on the current page.
7. Click on [Upload] to start uploading.
47
EN
To setup your account information for the website:
1. Choose the website.
2. Click on [SETTINGS] to go to the setup page.
3. Fill in your account information in the blanks. Then click on “Save”.
4. You can check [Remember Password] to save your account information and password in this
CAMILEO Uploader application. (If it is unchecked, the password request will appear after clicking
on [UPLOAD] on the thumbnail page.)
Note
• Some social websites may not be allowed to access in certain regions.
• You must have internet access to upload files to the website.
48
EN
Section 9
Webcam Mode
Webcam Mode
Connect the computer and camcorder with the supplied mini USB2.0 cable. Press the [Video] Button to
switch to the Webcam Mode. The Indicator Light turns BLUE. In this mode, you can implement live video
conference meetings and multimedia communications.
49
EN
Section 10
Specifications
Specification
Image sensor
8 Mega pixel CMOS sensor
Operation modes
Video record, Photo record, Webcam
Lens types
12× Optical zoom
Lens
Auto Focus Lens (F3.1-F4.2)
Advanced zoom
FULL HD 1080/30 : 20x
HD 720/60, HD 720/30, VGA 480/30 : 15x
Digital zoom
60x
Shutter
Electronic
LCD monitor
7.6 cm (3 inches) touch LCD (16:9)
Storage media
Built-in 128MB memory (partial memory is used for firmware code);
SD/SDHC/SDXC card slot support (up to 128GB)
Image resolution
16 Mega Pixels: 4608 x 3456 (Interpolated)
8 Mega Pixels: 3264x2448
3 Mega Pixels: 2048x1536
Video resolution
FULL HD 1080/30 : 1920X1080(30fps)
HD 720/60 : 1280X720(60fps)
HD 720/30 : 1280X720(30fps)
VGA 480/30 : 640X480(30fps)
White balance
Auto/Daylight/Fluorescent/Tungsten
ISO
Auto/800/1600/3200/6400
Exposure Measure
Auto/ Center/ Spot
Self-timer
10 seconds delay
Light
Light ON/ Light OFF/Digital Light
File format
Photo: JPG
Video: MP4 (H.264)
Image play
Single image/Slideshow
PC interface
Mini USB 2.0 port
TV out
HDMI
Battery
Lithium-ion rechargeable battery
Dimension
120mm (W) × 54mm (H) × 62mm (T) (4.72(W) × 2.13(H) × 2.44(T) inches)
Weight
270 g ( without battery)
50
EN
Section 11
Troubleshooting
Troubleshooting
111 If the LCD preview is not clear while shooting, how can the focus be adjusted?
Try to switch between Macro and Normal Mode.
222 The files on the memory card do not display smoothly when the LCD shows the “!” marking.
The “!” symbol means the SD card is too low of a speed or contains corrupted files. The way to solve
this condition is to format SD card by the camcorder instead of a PC (Please refer to the detailed
Format instruction in Section 5).
Or please change the SD/SDHC/SDXC card to a high speed one.
333 Why do some of my indoor photos look blurry and dark?
The camcorder extends photo exposure time under low light/ indoor condition. Keep the camcorder
(and the target subject) steady for several seconds when taking photos. The shutter will sound when
photos are being taken.
444 How do I charge battery?
You must use the supplied AC charger or the USB cable. The camcorder must be turned OFF. The
blinking light confirms the camcorder is currently charging, and the light becomes constant after
the charging is completed. In AC charging Mode, the light will turn itself off automatically after 3~5
minutes . The full charge time is about 4 to 5 hours. (Actual charging time may vary. It depends on
the battery conditions.)
5. After connecting the USB cable to the computer:
1. The disk “DV” indicates the internal memory of the camcorder.
2. “Removable Disk” indicates the external memory. (If the SD card is inserted in the camcorder.)
3. The disk “DVAP” indicates the built-in CAMILEO UPLOADER application is saved to this disk.
Please DO NOT format this disk or delete the application inside; otherwise, the CAMILEO
UPLOADER application may not function.
51
EN
Section 12
Other Information
TOSHIBA Support
Toshiba’s technical support Web site
For technical support, or to stay current on the most recent software and hardware options for your
CAMILEO® product and for other product information, be sure to regularly check the Toshiba Web site
at
Australia: www.mytoshiba.com.au/support
New Zealand: www.mytoshiba.co.nz/support
For technical support, call the Toshiba Support Centre:
Australia: 13 30 70
New Zealand: 0800 445 439
Expert staff provides technical assistance during normal business hours, 5 days a week, excluding
public holidays.
Be sure to have the following information available before you call:
• Product serial number and part number
• Place of purchase
• Applicable error messages or fault symptoms
• Operating system (if applicable)
• Installed third-party hardware and software (if applicable)
Warranty
Online Warranty Information
This product comes with a One (1) Year Standard Limited Warranty. The One (1) Year Standard Limited
Warranty for Toshiba Computer Accessories and Electronics can be found online at
Australia: www.mytoshiba.com.au/support
New Zealand: www.mytoshiba.co.nz/support
Operating Environment Conditions
Operating temperature: 5 to 35° C
Operating humidity: 20 to 80 %
(no condensation allowed)
52
EN
Additional Information
© Copyright 2011 TOSHIBA CORPORATION. All rights reserved.
TOSHIBA reserves the right to make technical changes. TOSHIBA assumes no liability for damages
incurred directly or indirectly from errors, omissions or discrepancies between this product and the
documentation.
About the battery pack
• Use only batteries recommended by TOSHIBA as replacements. The battery pack is lithium ion
batteries, which can explode if not replaced, used, handled or disposed of properly. Dispose of the
battery as required by local ordinances or regulations.
• Charge the battery pack only in an ambient temperature between 5 and 35 degrees Celsius. Otherwise,
the electrolyte solution might leak, battery pack performance might deteriorate and the battery life
might be shortened.
• Never install or remove the battery pack without first turning off the power and disconnecting the AC
adaptor.
• Use only the product connected to an AC power source or optional TOSHIBA Battery charger to
charge the battery pack. Never attempt to charge the battery pack with any other charger.
• Caution for the battery of the remote control: Risk of explosion if battery is replaced by an incorrect
type. Dispose of used batteries according to the instructions.
53
EN
0970AB812L-A02S
X200_UM_V01_1020
54
73
For more information, please visit:
www.mytoshiba.com.au
EN
EN