Download User`s Manual

4. Each Component Function
Analog RGB Interface: A-RGB (BX-2x0 model)
Has a connector for connecting a display. The connector is named A-RGB (HD-SUB 15P).
Table 4.4. A-RGB Connector
15 pin HD-SUB (FEMALE)
Connector type
Pin No.
Signal name
Pin No.
Signal name
1
RED
9
+5V
2
GREEN
10
GND
3
BLUE
11
N.C.
4
N.C.
12
DDCDATA
5
GND
13
HSYNC
6
GND
14
VSYNC
7
GND
15
DDCCLK
8
GND
For the LCDs that can be connected, please refer to “Chapter 7 List of Options”.
Display driver
Install the appropriate audio driver for your OS from the bundled CD-ROM [IPC-SLIB-01].
(For information on the latest version of IPC-SLIB-01, check the CONTEC's web site.)
CAUTION
When the analog display is used, Windows MS-DOS may not be properly displayed in full-screen
mode.
This is because the frequency and resolution of Windows and MS-DOS (full-screen display) are the
same due to the screen settings while the display parameters are different.
For display, as only one parameter can be stored for one frequency or resolution, only either of
Windows or MS-DOS screen can be displayed properly.
In this case, change the resolution or display frequency of Windows so that it is not the same as for
the MS-DOS display.
24
BX-2x0-DCxxxx, BX-2x0D-DCxxxx User’s manual