Download WiPry-Combo Manual - Interworld Electronics

Section 1 Getting Started with SAFETY
1.10 WiPry-Combo Quickstart Guide
The quickstart guide listed below applies for both the spectrum analyzer and the dynamic power meter.
Quickstart Guide
WiPry-Combo
Spectrum Analyzer & Dynamic Power Meter
30 PIN DOCK CONNECTOR
CONNECT TO APPLE DEVICE
WA R N I NG
DO NOT APPLY MORE
THAN 20dBm TO THE
ANTENNA WITHOUT
EXTERNAL
ATTENUATION
2.4GHz - 2.5GHz
ANTENNA
ACCESSORY
WA R N I NG
DO NOT APPLY MORE
THAN -0.5/+3.8 V TO THE
EXTERNAL TRIGGER
EXTERNAL TRIGGER
(OPTIONAL)
1) Connect Antenna and External Trigger (optional)
to the appropriate ports.
2) Download “WiPry” from the App Store.
3) Connect accessory to the iPod touch®, iPhone®,
or iPad™ using the 30 pin dock connector.
4) For more information, please visit the Oscium website.
www.oscium.com
“Made for iPod”, “Made for iPhone”, and “Made for iPad” means that an electronic accessory has been designed to connect specifically to iPod,
iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or
iPad may affect wireless performance.
Revised November 17, 2011
3