Download 5030U Controller User manual

Transcript
Standard USB cable 14-211-180
Detached USB cable 14-212-040&14-213-180
Control card 5030U
3 Installing and connecting
Mount touchscreen on monitor and then connect it to PC with cable and control card as following
steps
Standard USB cable connecting
1. Connect touchscreen 5pin port to 5pin connector of control card.
2. Connect cable 14-211-180 4 pin connector to 4pin connector of control card.
3. Connect 14-211-180 USB port to PC USB port.
5. Connect 14-211-180 GND ring to ground.
Detached USB cable connecting
1. Connect touchscreen 5pin port to 5pin connector of control card.
2. Connect cable 14-212-040 4 pin connector to 4pin connector of control card.
3. Connect 14-212-040 USB port to 14-213-180 USB port.
www.leadingtouch.com
4/22