Download CNGE2FE24MS

Transcript
event device-cold-start
G
[Systemlog|SMTP|Both
Set cold start event
switch(config)#event device-cold-
type
start both
Set Authentication
switch(config)#event
failure event type
authentication-failure both
Set X-ring topology
switch(config)#event ring-
changed event type
topology-change both
Set port event for
switch(config)#interface
system log
fastethernet 2
]
event authentication-
G
failure
[Systemlog|SMTP|Both
]
event ring-topology-
G
change
[Systemlog|SMTP|Both
]
event systemlog
I
[Link-UP|LinkDown|Both]
switch(config-if)#event systemlog
both
event smtp
I
[Link-UP|Link-
Set port event for
switch(config)#interface
SMTP
fastethernet 2
Down|Both]
switch(config-if)#event smtp both
show event
P
Show event selection
no event device-cold-
G
Disable cold start event switch(config)#no event device-
start
no event
type
G
authentication-failure
no event ring-
G
topology-change
switch#show event
cold-start
Disable Authentication switch(config)#no event
failure event type
authentication-failure
Disable super ring
switch(config)#no event ring-
topology changed
topology-change
event type
no event systemlog
I
Disable port event for
switch(config)#interface
system log
fastethernet 2
switch(config-if)#no event
systemlog
129