Download User Manual - Projector Central

Function
09. OSD Select (Command:kl)
12. Lamp Mode (Command:np)
→ To select OSD On/Off.
→ To reduce the power consumption of the projector.
Transmission
[k] [ l ] [ ] [Set ID] [ ] [Data] [Cr]
Data 0 : OSD Select Mode Off
1 : OSD Select Mode On
Transmission
[ n ] [p] [ ] [Set ID] [ ] [Data] [Cr]
Data 0: Low Power Off
1: Low Power On
Ack
Ack
[ l ] [ ] [Set ID] [ ] [OK] [Data] [x]
Data 0 : OSD Select Mode Off
1 : OSD Select Mode On
[p] [ ] [Set ID] [ ] [OK] [Data] [x]
Data 0: Low Power Off
1: Low Power On
10. Remote Control Lock/Key Lock
(Command:km)
13. Auto Configure (Command:ju)
→ To lock the front panel controls on the
projector and remote control.
→ To adjust picture position and minimize image shaking automatically. It works only in RGB mode.
Transmission
[k] [m] [ ] [Set ID] [ ] [Data] [Cr]
Data 0 : Lock Off
1 : Lock On
Transmission
[ j ] [u] [ ] [Set ID] [ ] [Data] [Cr]
Data 1: To set
Ack
Ack
[m] [ ] [Set ID] [ ] [OK] [Data] [x]
Data 0 : Lock Off
1 : Lock On
[u] [ ] [Set ID] [ ] [OK] [Data] [x]
Data 1: To set
* If you're not using the remote control, use this mode.
When main power is On/Off, external control lock is
released.
14. Input Select (Command:xb)
11. Color Temperature (Command:ku)
→ To select input source for the Set.
→A
djust the color temperature. But, color temperature cannot
be adjusted if video mode is set to bright or golf.
Transmission
[k] [u] [ ] [Set ID] [ ] [Data] [Cr]
Data 0 : Normal
1 : Cool
2:Warm
4 : Natural
Ack
Ack
[b] [ ] [Set ID] [ ] [OK] [Data] [x]
[u] [ ] [Set ID] [ ] [OK] [Data] [x]
Data 0 : Normal
Transmission
[x] [b] [ ] [Set ID] [ ] [Data] [Cr]
Data 20 : Video
40 : Component1
41 : Component2 60 : RGB1
61 : RGB2
90 : HDMI
1 : Cool
2:Warm
4 : Natural
Data
20 : Video
41 : Component2
61 : RGB2
40 : Component1
60 : RGB1
90 : HDMI
35