1
Download NI-CAN Hardware and Software Manual
Transcript
Appendix E Specifications Low-Speed/Fault-Tolerant Transceiver Cable Transceiver............................................. Philips TJA1054A Max baud rate......................................... 125 kbps Min baud rate ......................................... 5 kbps, 10 kbps min for all error modes CAN_H, CAN_L bus lines .................... –27 to +40 VDC Power requirements................................ Internally powered Single-Wire Cable Transceiver............................................. Philips AU5790 Max baud rate......................................... 33.3 Kbps (normal transmission mode), 83.3 Kbps (High-Speed transmission mode) Min baud rate ......................................... 5 kbps, 10 kbps min for all error modes CAN_H bus line..................................... –10 to +18 VDC Power requirement (always required).................................... +8 to +18 VDC (12 VDC recommended) on V+ connector pin (referenced to V–) © National Instruments Corporation E-9 NI-CAN Hardware and Software Manual
