Download manual CRX02 - MicroSys Electronics GmbH

MicroSys
Made for Professionals
5 Interfaces on CRX02
5.1
Power Supply Connector
For Power there is one Phoenix connector type MSTB2,5 with 2 pins on the right hand side.
PWR
Pin 1
Pin 2
+ 9V to +30V
- (GND)
Additionally there is a Wrap connector.
PWRE
Pin 1
Pin 2
+ 9V to +30V
- (GND)
On the left hand side there are two additional connectors to supply external boards.
PWRX is used to supply power to the MPE06.
PWX / PWY
Pin 1
VCC (5V)
Pin 2
GND
4
3
2
Pin 3
GND
Pin 4
VDD (3,3V)
PWRY
4
PWRX
3
1
CAN A
5.2
CAN B
Reset
The push button switch on the front panel of the CRX02 generates a hard reset to the board.
Datei: CRX02-02AC.doc
© 2007 MicroSys Electronics GmbH
Archivierung: 5
EW316MA-02AC
Page 19 of 43