Download Specifications for V609E

2-12
2 Errors Caused on the V609E
System Error
When a system error is detected, the following error screen is displayed.
SYSTEM ERROR : 32
TEA : XXXXXXXX
R0 : XXXXXXXX
R4 : XXXXXXXX
R8 : XXXXXXXX
R12 : XXXXXXXX
EXPEVT : XXXXXXXX
R1 : XXXXXXXX
R5 : XXXXXXXX
R9 : XXXXXXXX
R13 : XXXXXXXX
SSR : XXXXXXXX
R2 : XXXXXXXX
R6 : XXXXXXXX
R10 : XXXXXXXX
R14 : XXXXXXXX
SPC : XXXXXXXX
R3 : XXXXXXXX
R7 : XXXXXXXX
R11 : XXXXXXXX
R15 : XXXXXXXX
POWER
RUN
Error : XX
1
11
30
31
32
33
34
35
: Watch dock timer error
: Switch table error
: Request for displaying full error
: Memory allocation system error
: General exceptions/MMU address system error
: RTOS system error
: Memory error
(when detecting an error by self-check of RAM)
: Inaccurate memory error
(when detecting an access to a memory of an inaccurate memory model,
e.g. PLC or internal memory etc.)
The source of the error could be one of the following three problems. Contact the technical support department of your distributor.
1) Program crash due to noise
2) Hardware problem
3) Bad program
Others
About any other errors except one in this chapter, refer to ‘Appendix 3 Error’ in “Reference Manual (Function).”