1
Download F8914 User Manual - Four
Transcript
User Manual 4.4.2.27 Set the End Device wake time:AT+WTC Form Command Return Set AT+WTC=<number strings> AT+WTC? 0K ERROR +WTC: number strings OK Query Parameter description : number string Range: 0～65535 millisecond，when AT+SLE =1, set the wake time Default:0 4.4.2.28 Set the Data Interval:AT+ITV Form Command Return Set AT+ITV=<number strings> AT+ ITV? 0K ERROR + ITV: number strings OK Query Parameter description : number string Range: 6-1980 millisecond Default:20 Note: Data Interval is used to judge if the serial has recived the data . If data interval greater than the setting ,the program will process the serial data. The lower baudrate ,the longer data interval. 4.4.2.29Query the bootload version :AT+BTL Form Command Return Execute AT+BTL Four-Faith Zigbee BootLoad Ver: V1.01 http：//www.fourfaith.com Page 33 of 42
