Download Fibre to SAS/SATA II RAID Subsystem User Manual

Fibre to SAS/SATA II RAID Subsystem
5.5.7 NTP Configuration
NTP stands for Network Time Protocol. It is an Internet protocol used to synchronize
the clocks of computers to some time reference. Type the NTP Server IP Address to
enable the RAID subsystem to synchronize with it.
To set the NTP function, move the cursor to the main menu and click on the NTP
Configuration link. The RAID subsystem’s NTP Configuration screen will be
displayed. Select the desired function and configure the necessary option.
After completing the settings, tick on the Confirm The Operation and click on the
Submit button to save the configuration.
90
User Manual