1
Download Automatic Environment Control AEC
Transcript
Phason AEC-2 user manual SETTING UP STEP 4 Y Read through the ADJUSTING THE AEC-2 section starting on page 8 and get familiar with the programming procedures. Y Configure the AEC-2 according to the type of equipment connected. Y Mark the changes in the Blank Program Tables in Appendix D. PUTTING CONTROL INTO SERVICE STEP 5 Y Read the AEC-2 OPERATION section starting on page 14. Y Select the most useful factory program, see page 22. Y Make changes to the program as desired, see page 9. Y Mark the changes in the Blank Program Tables in Appendix D. METHODS OF USE STEP 6 101404 rev. 3 Y Read the METHODS OF USE section starting on page 23. 3
