Download GemBuilder for Smalltalk User`s Guide

Connectors
Making and Managing Connectors
Table 6.4 Postconnect Action Options in the Connector Browser (Continued)
updateGS
Initializes the GemStone server object using the current
state of the client object.
forwarder
Makes the client object a forwarder to the GemStone server
object.
clientForwarder
Makes the GemStone server object a forwarder to the client
object.
none
Leaves the client object and the GemStone server object
unchanged after their initial connection. The connector in
the case has no function, so it’s unlikely you’ll want to use
this option.
To create a new connector:
1.
Select the session in the Group pane.
2.
Place the cursor in the Connector pane.
3.
Select add from the menu.
4.
When prompted, specify the type of connector.
5.
When prompted, specify the names of the client and server objects.
6.
When prompted, specify the name of the dictionary for the server object.
7.
Specify the postconnect action.
To create a forwarder:
1.
Create a connector as described above.
2.
Select forwarder as the desired postconnect action.
To change the postconnect action:
March 2006
1.
Disconnect the objects by clicking on the Disconnected button.
2.
Change the postconnect action as required.
3.
Reconnect the objects by clicking on the Connected button.
GemStone Systems, Inc.
6-19