Download Appnote DSL Cable measurements

Transcript
Bode 100 - Application Note
DSL-Cable measurements with Bode 100
Page 13 of 21
Now you can start the frequency sweep measurement.
TR1/dB
-10
-20
-30
-40
-50
-60
-70
-80
-90
-100
5
TR1: Mag(Gain)
10
15
20
25
30
35
f/MHz
TR1(Memory): Mag(Gain)
This graph shows the crosstalk (NEXT) between two neighbouring pairs. Our
measurement result shows that the signal received at the near end of Pair2 is -40dB
or more below the signal sent into Pair1.
3.6 FEXT Measurement:
The setup for the FEXT measurement is almost similar to the NEXT setup. Use the
same configuration as in the attenuation measurement:
Note: You can use the same calibration as in the attenuation measurement.
Connect the DSL-Cable as shown and start the FEXT measurement.
Smart Measurement Solutions