Download to view the file - Support On Line

System Administrator's Guide - Access to GCOS 7 Services
4.1.3
How to Restart the SA7SRV Server after it Aborted
If the SA7SRV server is halted while OPEN 7 and GX-RPC7 are active, in order to restart
the server :
1.
Log on as SYSADMIN user.
2.
Enter the JCL command used by ISI7 :
EJ EXEC_SI7_SA7SRV LIB=SA7.IUM.SL
4.1.4
How to Restart SA7SRV Server after a GCOS 7 Crash
After a restart of GCOS 7, if you want to activate the IUM-SA7 agent :
4.2
1.
Restart OPEN 7. For more information on the procedure, see the document
OPEN 7 Administrator Guide. This procedure is used to automatically start the
subux sub-system as well as the socket server used by the SA7SRV server.
2.
Load the SM sys.dcm.system.
3.
Re-start the SA7SRV server.
HOW TO HALT THE SA7SRV SERVER
To halt the SA7SRV server :
1.
Load the binary library sys.dcm.rpc.binlib. To do this:
Use the command mwinlib bin sys.dcm.rpc.binlib.
2.
Enter the “terminate a RPC server” command :
TERMINATE_RPC_SERVER <Number of RON>
or
trpcs <number of RON>
4-2
47 A2 17UC Rev01