Download User manual

BeamTrek V3.1
Operation Manual : August 2010
4.4. Adjusting Current Limits and HV Value
By pressing the “HV & Limits” Button the Current Limits and HV Value
setup dialog will open.
To adjust a current limit use the Left Joystick to select it, or push directly on
the limit desired, and then adjust with the Right Joystick according to the axis
selected (left – right or up – down).
Figure 4-e: Limits and HV Dialog in Dwell Menu
4.5. DataSet Setup
By pressing the “Setup” Button the DataSet setup dialog will appear. This
contains generic DataSet related parameters like the emission value associated
with a 10V input in Auto mode for the current DataSet:
Figure 4-f: DataSet Setup Dialog
21