Download Advanced features

68 Setting up your TV
Skipping channels
Manual Tuning
After storing channels in memory, you can manually enter channels if the
channel number is known.
1 Press the SETUP button.
2 Select Installation > Channel Tuning > Manual Tuning, and then
press the OK button.
3 Use buttons 0–9 on the remote control to enter the channel number
(for example, 56).
4 Press the OK button.
5 Press the OK button again to begin Manual Tuning.
The channels found are listed at the bottom of the screen.
Option:
ATV
DTV
Description:
Analog channel
Digital channel
Skipping channels
To prevent a channel from being viewed, you can set it to be skipped.
1 Press the SETUP button.
2 Select Options > Channel Options and then press the OK button.
The list of channels appears.
Channel Options
Ch
Type
Label
101 - 201
DTV
CH-1
201
ATV
CH-2
101 - 201
DTV
201
ATV
101 - 201
DTV
201
ATV
101 - 201
DTV
(Sample Image) Channel options
3 Press the t/u (arrow) buttons to select the Skip column (8) and
press the p/q (arrow) buttons to select a channel to skip.
4 Press the OK button.
The box is selected.
5 To clear the selection, press the OK button.