Download User`s Manual
Transcript
Reset Switch: Press the Reset switch when you want to reset the system. This switch must be pressed with a pointed object, such as a paper clip or a ball-point pen. 4.2. Rear View Figure 3: Rear view of the 8-port switch Figure 4: Rear view of the 16-port switch 4.3. Install a KVM Switch (Single-Tier Installation) 4.3.1. Installation Guidelines All computers and devices must be turned OFF prior to installation. Disconnect power cords from the computers implemented with the Keyboard Power On function prior to installation, or the KVM switch may not work properly. Computers running Windows 98 must be connected to a KVM switch via PS/2 ports because Windows 98 does not support initial installation through the USB HID driver. Old computers may require USB setting adjustment in the BIOS to enable the USB interface. There is no guarantee that the EZswitch KVM switch can fully support a USB keyboard via a USB hub. 4.3.2. Console Connection Connect a keyboard, mouse and monitor to the console ports on the real panel of EZswitch (see Figure 5). 4