Download User`s Manual

Transcript

Reset Switch:
Press the Reset switch when you want to reset the system. This switch must be
pressed with a pointed object, such as a paper clip or a ball-point pen.
4.2. Rear View
Figure 3: Rear view of the 8-port switch
Figure 4: Rear view of the 16-port switch
4.3. Install a KVM Switch (Single-Tier Installation)
4.3.1. Installation Guidelines
 All computers and devices must be turned OFF prior to installation.
 Disconnect power cords from the computers implemented with the Keyboard
Power On function prior to installation, or the KVM switch may not work properly.
 Computers running Windows 98 must be connected to a KVM switch via PS/2
ports because Windows 98 does not support initial installation through the USB
HID driver.
 Old computers may require USB setting adjustment in the BIOS to enable the
USB interface.
 There is no guarantee that the EZswitch KVM switch can fully support a USB
keyboard via a USB hub.
4.3.2. Console Connection
Connect a keyboard, mouse and monitor to the console ports on the real panel
of EZswitch (see Figure 5).
4