Download POWERTRONIX

3
3.1
CONTROL PANEL
INTRODUCTION
The control panel is located on the upper front part of the UPS, and it’s used for easily check the general
status of the UPS and batteries and related alarms.
The panel contains an LCD screen (which indicates the operating status, measurements and alarms of the
UPS) and the red EPO button located on the right side below the display.
The display panel shows text messages and operating parameters on an LCD screen with 4 lines and 20
characters per line.
The screens are organized in 5 multi-level menus, which can be selected using the membrane buttons
under the LCD display.
fig. 3-1a
On the left side of the display there are two LEDs, the green one called “NORMAL” and a red one called
“ALARM”.
The actions of the LED are summarized in the table 3.1a
POWERTRONIX SpA reserves the right to modify this document without any notice
R&D – PROCEDURA START-UP DT 0419 – E02
Pag. 21 di 41