Download AVG Protection User Manual

Type of Login - defines the method for determining the mail server used for incoming mail:
o Automatic - login will be carried out automatically, according to your email client settings.
o Fixed host - in this case, the program will always use the server specified here. Please specify
the address or name of your mail server. The login name remains unchanged. For a name, you
may use a domain name (for example, pop.acme.com) as well as an IP address (for example,
123.45.67.89). If the mail server uses a non-standard port, you can specify this port after the
server name using a colon as the delimiter (for example, pop.acme.com:8200). The standard
port for POP3 communication is 110.
Additional Settings - specifies more detailed parameters:
o Local port - specifies the port on which the communication from your mail application should
be expected. You must then specify in your mail application this port as the port for POP3
communication.
o Connection - in the drop-down menu, you can specify which kind of connection to use (regular/
SSL/SSL default). If you choose SSL connection, the data sent is encrypted without the risk of
being traced or monitored by a third party. This feature is also only available when the
destination mail server supports it.
Email Client POP3 Server Activation - check/uncheck this item to activate or deactivate the
specified POP3 server
In this dialog you can set up a new Email Scanner server using the SMTP protocol for outgoing mail:
77