1
Download Hardware - Medacta
Transcript
MEDACTA iMNS - Instrumentation and Hardware ref. 99.30H.16US rev.02 3.4.4 Turning on the iMNS® Turn on the REOMED® 600 isolation transformer by setting the switch (A in figure 17) to ON (I). Check that the LED on the power supply unit and the green Power LED (I) on the Host USB Converter become on and the Power LED (I) on the front of the camera starts flashing (figure 18). Figure 18 – LEDS on Polaris Spectra System When the power LED stops flashing, you can hear two beeps. 29
