Download USER MANUAL BT10.5 91006
Transcript
USER MANUAL BT10.5 91006 1 BT10.5 K-5 Allen Bolt M7*P1.0*30MM (1) NO.K-1 Metal cover (1) K-10 Carriage Bolt M8*P1.25*55MM (4) NO.K-7 T-shape knob M7*65L(1) NO.K-6 Bushing NO.K-9 Acorn Nut for M8 Bolt (4) NO.K-4 Spring Washer Allen Key(1) Box Spanner(1) Screwdriver (1) (MM) 1 Exploded view 1 PARTS LIST AND TOOLS No. Description Q’ ty Computer 1PCS A-1 Screw M5X10L 4PCS B Handlebar Set 1SET B-1 Cap for handlebar 2PCS B-2 Hand Pulse 1SET B-3 Screw M3.5x20L 2PCS B-4 Pulse Wire 1PCS B-5 Foam grip 1PCS Handlebar post set 1SET C-1 Upper cable wire 1PCS C-2 Screw M5xP0.8x20L 2PCS Main Frame 1SET D-1 Flat washerφ 8*φ 19*2T 4PCS D-3 Screw M8*P1.25*16L 4PCS D-5 Bearing 6203 (RS) 2PCS D-6 Screw M4x10L 1PCS D-7 Sensor Box 1SET D-8 Flat washerφ 17.5xφ 25x0.3t 1PCS D-9 C type ringφ 17 1PCS A C D D-10 Right front cover 1PCS D-11 Right chain cover 1PCS D-12 Screw M3x8 10PCS D-13 Cover for crank 2PCS D-14 Right crank 1PCS D-15 Pedal Right 1PCS D-16 Pedal Left 1PCS D-17 Nylok nut M8xP1.0x20L 2PCS D-18 Left crank 1PCS D-19 Screw M4x40L 5PCS D-20 Left front cover 1PCS D-21 Screw 3/16″ (#10)x3/4″ 6PCS D-22 Left chain cover 1PCS 2 D-23 Wave washerφ 17.5xφ 25x0.3t 1PCS D-24 Flat washerφ 4*φ 10*1T 10PCS D-25 Adaptor 1PCS D-26 DC wire 1PCS D-27 Spring for idler 1PCS D-29 Bottle holder 1PCS E~E-11 Flywheel Set 1SET F~F-8 Idler set 1SET G-1 Bushingφ 22xφ 17x7.5mmL 1PCS G-2 Pulley 1PCS G-3 Shift 1PCS G-4 Screw M8xP1.25x12Lx5t 3PCS G-5 Belt 1PCS Front Stabilizer 1PCS H-1 Screw M8xP1.25x12Lx5t 2PCS H-2 End cap (Right) for front Stabilizer 1PCS H-3 End cap (Left) for front Stabilizer 1PCS Rear Stabilizer 1PCS I-1 End cap for rear Stabilizer 2PCS I-2 Adjustor 2PCS I-3 Nut 3/8"-16x3t 2PCS J Seat post set 1SET J-1 Plastics sleeve 1PCS J-2 Adjustor knob 1PCS J-3 Screw M5x6L 4PCS J-4 Left cover for seat slider 1PCS J-5 Right cover for seat slider 1PCS J-6 Seat knob 1PCS J-7 Flat washerφ 14.3xφ 25x2.0t 1PCS J-8 Screw set for seat slider 1PCS J-9 cap 2PCS J-10 Seat slider 1PCS J-11 Saddle 1PCS K-1 Metal cover 1PCS K-2 Cover for metal cover 1PCS H I 3 K-3 Flat washerφ 7xφ 12x1t 2PCS K-4 Spring washerφ 7x2t 2PCS K-5 Screw M7xP1.0x30L 1PCS K-6 Bushingφ 7xφ 12x40mmL 1PCS K-7 Screw M7xP1.0x65L 1PCS K-8 Flat washer φ 8*φ 19*2T 4PCS K-9 Nut M8 4PCS K-10 Screw M8xP1.25x55L L 4PCS Gear box set 1SET L-1 Screw M8*22L 1PCS L-2 Flat washer φ 8*φ 19*2T 2PCS L-3 Screw M6xP1.0*16L 2PCS L-4 Spring washer φ 6 2PCS L-5 Flat washer φ 6xφ 13x1t 2PCS L-6 Bushing φ 10xφ 14x6mmL 2PCS L-7 Chain M6*φ 18*63L 1PCS L-8 Nut M6 2PCS 4 ASSEMBLY INSTRUCTIONS Stage#1 4* 4* 4* 1. Put on front stabilizer (H) and rear stabilizer (I) to the mainframe assembly. Be noted: the front stabilizer has transportation wheel. Use carriage bolts(K-10), curve washer (K-8) and crown nut (K-9) to fix the stabilizers tightly. 2. Fix the right pedal (D-15) and left pedal (D-16) tightly to the right/left crank. 5 Stage#2 4* 1. Connect the upper and lower table together. 2. Fix the handlebar post to the main frame with Screws (D-3) and washer (D-12). 6 Stage#3 1* 2* 1* 1* 1* 2* 1. Assemble the handlebar (B) to the bracket on the handlebar post with handlebar clamp (K-1), spring washer (K-3), washer (K-4) and screw (K-5). 2. Fix the spring washer (K-3), washer (K-4) and metal bush (K-6) into the handlebar clamp. Insert the plastic cover to the handlebar clamp. 3. Fix the T-knob (K-7) to the plastic cover. Adjust the handlebar with your desired angle. Fasten the T-knob. Tight the bottle holder (D-29) to the handlebar post with two screws (C-2). 7 Stage#4 Fasten the saddle (J-11) to the seat post (J). And fix the seat post to the main frame with seat knob (J-2). 8 Stage#5 1. Connect the pulse cable coming out of the handlebar and the RPM sensor cable to the computer (A). Place the computer to the computer mast and fasten with Screws (A-1). Then the assembly is done. Fix the handlebar to the console mast with attached hardware. Have T knob (J) to go through bushing (J-4), handlebar cover (J-5), flat washer (J-6) and spring washer (J-7) to fix. INSTRUCTION MANUAL OF SM2704-67 9 BUTTON FUNCTION: In stop mode, the mode is to confirm all exercise data setting, and enter into program. MODE/ENTER In stop mode, press the button back to main menu. RESET To start or stop exercise. START/STOP To test hear rate recovery status. RECOVERY To select training mode and adjust function value up. UP To select training mode and adjust function value down. DOWN For body fat measurement BODY FAT DISPLAY EXERCISE DATA: TIME Display range 0:00~99:99 ; Setting range 0:00~99:00 DISTANCE Display range 0.00~99.99 ; Setting range 0.00~99.90km CALORIES Display range 0~9999 ; Setting range 0.00~9990 PULSE Display range P-30~240 ; Setting range 0-30~240 WATT Display range 0~999 ; Setting range 10~350 SPEED 0~99.9km RPM 0~999 OPERATION PROCEDURE 1. Connect power supply and computer will power on with a long beep sound, LCD display all segments for 2 seconds and enter into personal data setting mode (gender, age, height and weight) for U1~U4. (drawing A~F) 2. After user data set up, computer will display main menu (drawing G). A E B C F D G 3. In main menu, first exercise program MANUAL will flash, user may press UP and DOWN button to select MANUAL PROGRAM (12 profiles) USER PROGRAMHRCWATT. (Drawing H~K) 10 H I J K 4. Quick Start and Manual : Before exercise in Manual mode, user my set up TIME, DISTANCE, CALORIES and PULSE target. After power on, user may press START/STOP button to start exercise in MANUAL immediately without any setting. Level can be adjusted during exercise by press UP or DOWN. 5. PROGRAM: Before exercise in Program mode, user may set up TIME target. Press UP and DOWN to select Program with 12 profiles and press ENTER/MODE to confirm. Level can be adjusted during exercise by press UP or DOWN. 6. H.R.C.: Before exercise, computer will ask for user AGE first to calculate TARGET pulse. still press UP and DOWN to change target pulse from 30 to 240. 7. USER PROGRAM: User may User may press UP, DOWN and then press MODE to create his own profile. (from column 1 to column 20) User may hold on pressing MODE button for 2 seconds to quit profile setting. 8. WATT : The preset watt value 120 is flashing on screen in WATT setting mode. set target value from 10 to 350. User may use UP, DOWN button to Press MODE button for confirm. 9. RECOVERY : After exercising for a period of time, keep holding on handgrips and press “RECOVERY” button. All function display will stop except “TIME” starts counting down from 00:60 to 00:00. Screen will display your heart rate recovery status with the F1,F2….to F6. F1 is the best, F6 F6 is the worst. User may keep exercising to improve the heart rate recovery status. (Press the RECOVERY button again to return the main display.) 10. BODY FAT: 10-1 In STOP mode, press the BODY FAT button to start body fat measurement. 10-2 Then selected user (U1~U9) will blinking for 2 seconds. Then start measuring. 10-3 During measuring, user have to hold both hands on the handgrip. And the LCD will display “--” “--“ for 8 seconds until computer finish measuring. 11 10-4 LCD will display BODY FAT advice symbol, BODY FAT percentage, BMI for 30 seconds. NOTE: 1. This computer require 9V, 0.5mA adaptor. 2. When user stop pedaling for 4 minutes, computer will enter into power save mode, all setting and exercise data will stored until user start exercise again. 3. When computer act abnormal, please plug out the adaptor and plug in again. 12