Download Music Studio Lite User Manual

Effects
Volume
Master gain
This is not the device gain, instead it controls the gain of the internal limiter. High values may lead to unwanted volume
compression or distortion, low values may not produce the desired volume. Different volumes may be required depending on
your output route (the device's internal speaker, or earphones, or loudspeakers).
In technical terms, this setting is required because if all playing instruments are mixed (added up), the resulting values will in most
cases be much higher than 65535 (the 16 bit border) and clipping would occur. The limiter uses a smooth mathematical function
(a curve) to compress larger numbers into the 16 bit range. The master gain slider controls the slope of this curve.
Device volume
Brings up a popup with a slider which has the same function as the iPhone's hardware volume buttons. If the iPhone's internal
speaker is used (not recommended), be sure not to turn it all the way up. If you connected external speakers, set this slider to
maximum and control the volume via the speaker's volume controls for the best audio quality.
Decibel meters
These gauges indicate the current output level of each of the stereo channels.
Music Studio 1.5.1
30