Download Appendix B EGS5 USER MANUAL
Transcript
Table B.1: Variable descriptions for COMMON block BOUNDS, include file egs5 bounds.f of the EGS5 distribution. ECUT Array of region-dependent charged particle cutoff energies in MeV. PCUT Array of region-dependent photon cutoff energies in MeV. VACDST Distance to transport in vacuum (default=1.E8). In addition to MAIN, HOWFAR, and AUSGAB, additional subprograms may be included in the user code to facilitate the geometry computations of HOWFAR, among other things. (Sample “auxiliary” subroutines useful in performing distance-to-boundary computations and in moving particles across regions in a variety of common geometries are provided with the EGS5 distribution.) The interaction between the user code and the EGS5 modules is best illustrated in Figure B.1. In summary, the user controls an EGS5 simulation by means of: PEGS5 HATCH SHOWER HOWFAR AUSGAB parameters variables Calls to subroutines: to create media data to establish media data to initiate the cascade Calls from EGS to user subroutines: to specify the geometry to score and output the results Altering elements of COMMON blocks: inside EGS5 source code, to set array dimensions inside user code, to specify problem data The following sections discuss the above mechanisms in greater detail. B.3 Variables in EGS5 COMMON Blocks Listed in Tables B.1 through B.17 are the variables in EGS5 COMMON blocks which may be relevant to the user, along with a brief description of their functions. Methods for manipulating these variables to either control EGS5 shower simulations or to retrieve results will be discussed in subsequent sections. Note that an asterisk (*) after a variable name in any of the tables indicates a change from the orginal EGS4 default. 3