Download VNS2500 - Visiplex

If your system uses an external transmitter, connect the transmitter data cable between the
TS101-XX transmitter and the J2 port at the back of the VNS2500. Connect the antenna to the
external transmitter’s ANTENNA BNC connector.
2. Connect the RJ-45 plug of the microphone to the MIC input at the back of the VNS2500.
3. Connect the provided power supply to the DC jack at the back of the VNS2500 and turn the
POWER switch to ON position. The main menu should appear with the PAGE TO: displayed on
the top line.
If you are using an external transmitter make sure it is powered on.
4. Press the B key for the Administration Menu and enter the default password (2500). The
menu top line should display SELECT OPTION:
5. Press 2 followed by the # key for the internal clock Time Setup. Enter the local time in 24
hours (military) format. The display will change back to Time Setup.
6. Press 3 followed by the # key for the internal clock Date Setup. Enter the local date in
MMDDYY format. The display will change back to Date Setup.
7. Press the * key to return to the Main Menu. Make sure the correct time as displayed on the VNS2500
display
6