Download AMPView - AMPS Technologies

AMPView
Model>Define>Material Library>Apply/UpdateMaterial||Delete Material Index
These options allows the material data to be created /or edited.
Model>Define>Material Library>Save material data to file
This saves the up to date material library to the material.lib file. This is the file that is always
used when AMPView look for a material information.
Model>Define>Material Library>Import from Material Data File
If the user has multiple material data file stored under different filename, this utility will read the
information stored on the file, and then append them to the current material database. Note
that it should be save back to the material database file so the future AMPView session will
automatically use the newly merged material database.
Result Menu
The Results Menu
This performs the post-processing of the model results.
Fig. 5.1 The Model result Menu
Model Result>Contour Display>Select TimeStep…
This allows the user to select the time/step for result examination, inquiry, animation. A dialog
box is presented with the available time/step selection as below.
Note that this value shown could be either a time/step value, or a eigenvalue corresponding to
a eigen analysis mode, or could be a load multiplier from an arc length analysis. It really
depends on the nature of the output file being read in. Choosing this value will automatically
update the corresponding nodal results to match the selected time/step/mode/multiplier.
Contour Display
Result Contour Controls
Model Result>Contour Display>Contour Type
This allows the user to select the quantity to be contoured from a dropdown list as show below.
65