Download AMPView - AMPS Technologies

AMPView
The Model>Condition>UserDefinedLoad >New Type+Value
This will create a new Type Name and save the current data entered this page into the
condition new Type Name condition set. This is a quick way of creating a new Type Name if
the user has not created a new Type Name in the previous Type page.
The Model>Condition>UserDefinedLoad >Update
This will save the entered data and updates the database of the current active Type Name as
shown in the Name field.
The OverSet Condition
The OverSet boundary condition is an advanced condition set that is mainly used for large
deformation motion such as bullet penetrating through air or bubble rising in a pond type
application. In such cases, a finite element group (OverSet Entity) is moving across another
finite element group (OverSet Domain). The user must specify the OverSet type and select the
proper geometry association. It can also be used as the traditional VOF (volume of the fluid)
method specification for applications such as bubbling in water. In such case, the air bubble is
the OverSet Entity, and the water is the OverSet Domain. The problem is extremely nonlinear
due to the geometric constraint and fluid-solid interaction on the interface. To use this feature,
please contact technical support for further assistance.
The Model>Condition>OverSet/VOF>Name
This name is the same as the one have been created in the condition Type page. It is
displayed here for information purpose.
The Model>Condition>OverSet/VOF>New Type+Value
63