1
Download FSP 150SP-100 R6.1.1..
Transcript
Chapter 5 Communications Provisioning PS Note If Management Traffic Bridging is enabled, only eth0 is allowed for Interface Name. To enable Management Traffic Bridging, refer to Table 30: System Configuration Settings on p. 464. Step 4 Go to Step 1. Step 5 Left click on “Communications” and select the “Static ARP Entry” tab. (see the following figure) FSP 150SP-100 R6.1.1 80000026364 Issue: A, © 2014 ADVA Optical Networking SE - Confidential Figure 180: Display Static ARP Entries Step 6 Go to Step 1. Step 7 To delete a Static ARP Entry, right click on Communications and select “Delete Static ARP Entry” (see the following figure): Figure 181: Delete Static ARP Entry Click the radio button in the “Delete” column for each ARP entry to be deleted. Click on OK. Installation and Operations Manual 303
