Download b maXX BM1000

2.6
2.6
Inappropriate use
Inappropriate use
Listed below you will find some examples of non-appropriate application. The information
below is intended to give you some impression of what non-appropriate application is.
However we cannot state all possible non-appropriate applications here. All applications,
where the notes and information given in this documentation is disregarded, are non-appropriate and therefore forbidden.
Examples:
m You disregarded the notes in this manual.
m The device has not been specifically applied as a converter in order to control a motor.
n The device has been
m mounted incorrectly,
m connected incorrectly,
m commissioned incorrectly,
m operated incorrectly,
m mounted, connected, commissioned, operated and/or maintained by not qualified or
inadequately qualified personnel,
m inappropriately maintained or not maintained
(also consider the descriptions of the components),
m overloaded it,
n operated
m with defective safety devices,
m with incorrectly mounted safety devices or without safety devices,
m with incorrectly working safety- and protection devices,
m outside the specified environmental conditions.
m You have modified the device.
m You have insufficiently monitored the parts, which are subject to a wearing.
m You have improperly carried out a repair.
m You have combined the device with improper products, which are not enabled for devices described in this manual.
m You have combined the device with faulty and/or faulty documentated products of other manufacturers.
m The device has been operated in an explosive environment.
2.7
Safety equipment
The devices b maXX® BM1000 comply with the protection class IP 20.
WARNING
The following may occur, if you do not observe this warning information:
m serious personal injury
m death
The danger is: electricity.
Operate the device in a control cabinet, which provides a protection against a direct touching
of the devices and fulfills at least the demands of the EN61800-5-1, chapter 4.2.3.3.
18
Manual b maXX® BM1000
of 174
Document No. 5.07003.04
Baumüller Nürnberg GmbH