Download Operator Workstation Technical Bulletin

Operator Workstation Technical Bulletin
3
Operator Workstation
Introduction
The Operator Workstation (OWS) is an easy-to-use, high-level
interface for the operator of a Metasys® Building Automation System
(BAS). This document describes the OWS and how to:
•
commission a new OWS
•
install software
•
install Metasys Person-Machine Interface (PMI) software
•
install Metasys PMI upgrade software
•
establish a connection to an N1 network for the first time with a
non-configured workstation
•
direct connect to N1 LAN - Ethernet Network
•
direct connect to a Network Control Module (NCM)
•
dial-up connect to an NCM - with modem
•
dial-up connect to an NCM - with Integrated Services Digital
Network (ISDN)
•
add a printer supported by the Windows® 2000 Professional
operating system
•
add an Lexmark® Proprinter® printer for NCM printing
•
configure the OWS for printers
•
fix line feed problems when using a serial printer
•
connect and configure a modem to an OWS
•
connect and configure a modem to an NCM
•
add user-defined modems
•
configure ISDN Modems
•
install the Microsoft® Backup Utility
•
install Metasys PMI new project software