Download Dataman 48XP Manual - Dataman Programmers Ltd.
Transcript
This option is used to select a new active device. It is important to select the correct device, as the algorithms used to program devices are device-specific. The following screen will appear: Figure 4.1 Screen for selecting Change Device Special note in device package and its selection In the above screen, you can find both AT89C51 and AT89C51*44 selections, the AT89C51 means this is a 40 pin DIP chip, no adapter is required and 89C51*44 means the chip is 44 pin PLCC or QFP/TQFP, adaptor required. After selecting the 89C51*44, at the bottom of the software screen will be displayed chip information and the adapter requirement. In this example, it shows SDP-UNIV-44 as the recommend adapter, it means for a 44 pin PLCC chip, you need the 44 pin PLCC universal adapter, if your chip is 44 QFP or TQFP, you will need a 44pin QFP (SDP-UNIV-44TQ) or a 44pin TQFP (SDP-UNIV-44TQ) adapter. If you have a 3rd party 44 pin PLCC adapter that swaps the 44 21